zagato Posted July 1, 2020 Posted July 1, 2020 I am having a problem with my heater/ac controls. When selecting the control buttons it does not matter whether the vent, floor or defroster is selected. The air mostly comes out of the defroster and a bit out of the heater regardless but not the vents. I suspect it is a vacuum problem. Can anyone suggest where to start?
Art Dalby Posted July 2, 2020 Posted July 2, 2020 Zagato, Had same problem. found 2 very thin tubes running from the vacume tank on top of the engine down to the bottom of the firewall in front of where the hvac controls are behind there. I just touched one and it crumbled, touched the other and it did also. Didn't want to fight running lines through the firewall so I broke off the lines, leaving an inch or two coming out. Took a piece of the broken line to O'Reillys and got two pieces of rubber hose to fit over the ends I left stick out, slipped them on and have had air ever since.--Art Dalby, Viera, Fl. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now