kings32 Posted April 23, 2020 Share Posted April 23, 2020 Helping a Friend with Resstoration ,Trying to remove engine and trans from frame every thing unbolted , How do you remove the rear mounts . kings32 Link to comment Share on other sites More sharing options...
Johan Boltendal Posted April 23, 2020 Share Posted April 23, 2020 le and ri two large bolts, from the outside of the frame going to two inside threaded cones in the crankcase. Take notice before loosening the bolts, not to take out the two bolts at the rear of the crankcase. these two bolts are holding the cones in place and prevent them from turning with loosening the two said bolts. The engine and box will come down, so you have to support these in a way, before taking the two bolts out. Link to comment Share on other sites More sharing options...
kings32 Posted April 27, 2020 Author Share Posted April 27, 2020 Thanks I found a manual , you have to take two locking bolts before the large side bolts . Tight with the steering box . Got it out and on a dolly , now I can start cleaning up the fram e and paint ,Thanks again .Kings32 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now