Brooklyn Beer Posted December 7, 2019 Share Posted December 7, 2019 Can someone tell me the size of the exhaust pipe / flange that mates to the manifold? Mine is cracked and not doing much good and I would like to buy just a repair section with flange and weld in the new section myself. Link to comment Share on other sites More sharing options...
ArticiferTom Posted December 7, 2019 Share Posted December 7, 2019 (edited) The pipe is separate from clamp that grips pipe and bolts to exhaust manifold flange . Not to hard of piece to make on exhaust bending machine . It requires a swag out and flange lip on end . The bending of 90 degree elbow was done easier with electrical conduit bender and the little kick then added with exhaust machine . Huh ! guess it wasn't that easy . I'll try to find a pic . Edited December 7, 2019 by ArticiferTom (see edit history) Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted December 7, 2019 Author Share Posted December 7, 2019 All I need is the flange and a short section. Wagner makes them in different sizes and I can weld that on here. Just need to know the size of the pipe and flange. Link to comment Share on other sites More sharing options...
ArticiferTom Posted December 7, 2019 Share Posted December 7, 2019 2 minutes ago, Brooklyn Beer said: All I need is the flange and a short section. Wagner makes them in different sizes and I can weld that on here. Just need to know the size of the pipe and flange. I'll measure or send you one ,if I kept my spare first try one . Will look . Check pic above just added . Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted December 7, 2019 Author Share Posted December 7, 2019 Yep, If you know the size a repair piece that is swedged is what I really need or maybe I can find a coupling to weld on what you have there.. Link to comment Share on other sites More sharing options...
ArticiferTom Posted December 7, 2019 Share Posted December 7, 2019 Have to look better , tomorrow . But measuring existing is 1-1/2 exhaust pipe OD. Swagged out to 1-1/2 ID ,then lipped . If you have clamp if has to fit it's ID and lip recess . Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted December 8, 2019 Author Share Posted December 8, 2019 Is the piece in the clamp a "T" flange that bolts to the manifold or is it just a flared end? Mine rattles around and can be pulled down about 3/8 of an inch Link to comment Share on other sites More sharing options...
ArticiferTom Posted December 8, 2019 Share Posted December 8, 2019 Just flared over ( as Pictured above ) and gasket between it and manifold . Your probably missing flange . 1 Link to comment Share on other sites More sharing options...
ArticiferTom Posted December 11, 2019 Share Posted December 11, 2019 Had no luck finding spare , I made . You should be able to get made at any shop with bender . They'll take 1 1/2" and swag out as would if making slip over . And flare lip end . If no luck maybe in future can access friends bender again . Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted December 11, 2019 Author Share Posted December 11, 2019 Thanks for looking ! So just flare over the 1 1/2 end ? Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted December 11, 2019 Author Share Posted December 11, 2019 do me a favor. Look here and tell me which one you think wold make a good repair piece to start with https://www.bearriverconverters.store/collections/1-5-1-1-2-adapters-couplings Link to comment Share on other sites More sharing options...
ArticiferTom Posted December 11, 2019 Share Posted December 11, 2019 I'd say 548531 ROL150ID150OD but will need flare . Maybe easier to tig flare on your existing . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now