wanted for a 31 PA

[Brooklyn Beer]

Inside the hub caps there are two pieces of spring steel with a tooth on each end that protrudes into the hub and holds the hubcap in place.   I need to replace some. Is there anyone making these or is a self fabrication item ?  Hate to loose one of these gorgeous hub caps

[keiser31]

Just now, Brooklyn Beer said:

Inside the hub caps there are two pieces of spring steel with a tooth on each end that protrudes into the hub and holds the hubcap in place.   I need to replace some. Is there anyone making these or is a self fabrication item ?  Hate to loose one of these gorgeous hub caps

I may have some crappy caps with the parts you need. How many do you need and do you have a photo of the part you need to be certain they are the same?

[keiser31]

Do the tabs look like this?

Edited December 6, 2019 by keiser31 (see edit history)

[Brooklyn Beer]

That is them.  I will have to get a total count but I think I need 4.  A couple have has been replaced already with a small screw replacing the rivet and are black spring steel.  Will get a pic in the morning. My tractor guy showed up with a bottle of Tullamore D.E.W. tonight and I doubt I could focus a picture tonight of what i have !  I really have no clue how you could break them off but someone did.  The 4 caps only have one each with the broken remnants attached to the rivet on the opposing side. They don't look hard to make worst case