streets Posted October 29, 2002 Share Posted October 29, 2002 I don't have an interchange manual, but was hoping someone could look this up. I have a 66' Toronado that needs a radiator schroud. I found a seller that has one, he states it is for a 68' Toronado. The dimensions seem close, I just want to be sure. It also comes with the top metal guard. Even if you don't have a manual, if someone with a 66' or 67' could measure theirs, it would be greatly appreciated. thanx,streets Link to comment Share on other sites More sharing options...
rocketraider Posted October 29, 2002 Share Posted October 29, 2002 Streets, right now the best I can do is tell you that 1966-67 use one part number, and 1968-70 use another. The pics in the 67 and 68 manuals don't offer much to distinguish them, but the 66-67 looks like it's more squared off at the bottom. Being as the cars are pretty much the same under the sheetmetal 1966-70, I'll say it <span style="font-style: italic">should</span> fit. Check to make sure the bolt holes are in the same locations.There's a note in the 67 manual that says the shroud is used only on A/C and HD cooling cars, so if you ain't got all that, you can probably get away with not using it. But then again, you are in AZ. Link to comment Share on other sites More sharing options...
streets Posted October 30, 2002 Author Share Posted October 30, 2002 Thanx again rr, I will check the bolt pattern to the radiator mount. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now