56 Buick Posted September 3, 2018 Share Posted September 3, 2018 I may not get an answer to this but in case someone actually knows the answer... One of the windscreen wiper bezels on the car is missing the small diameter metal tube that the rubber washer hose connects onto. Does the metal tube simply fit into the back of the bezel via an interference fit or is the metal tube joined to the bezel in some other manner? I need to take or pull out the metal tube from a bad bezel I have bought and then put this into my good bezel that is missing the tube. As I understand it the 54-56 small body cars all use the same bezel. Can anyone help? Thanks Drew Link to comment Share on other sites More sharing options...
Beemon Posted September 3, 2018 Share Posted September 3, 2018 I believe it is press fit. I do not believe anything is retaining it otherwise. Be careful, its copper. Link to comment Share on other sites More sharing options...
56 Buick Posted September 3, 2018 Author Share Posted September 3, 2018 4 minutes ago, Beemon said: I believe it is press fit. I do not believe anything is retaining it otherwise. Be careful, its copper. Thanks, I did try and pull it out but no luck so far. I think I will put the heat gun on the bezel and see if can loosen the fit and try again. Link to comment Share on other sites More sharing options...
56 Buick Posted September 5, 2018 Author Share Posted September 5, 2018 Well it won't budge ... I am going to have to give this some more thought. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now