jackofalltrades70 Posted June 13, 2017 Share Posted June 13, 2017 Need a spring for the plunger return. Is the round spring on the left. This spring pushes the plunger out to latch the door. Any leads appreciated Matt Link to comment Share on other sites More sharing options...
oldcar Posted June 18, 2017 Share Posted June 18, 2017 Which of the three visible springs are you looking for? It looks like typical Rolls Royce over engineering. In your own terms:- just pee on it and walk away!":D Bj. Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 18, 2017 Author Share Posted June 18, 2017 The bigger spring in the middle. Link to comment Share on other sites More sharing options...
Guest Anglesey Posted September 10, 2017 Share Posted September 10, 2017 The spring is not an RR part, as the bodywork was made by others, barker / hooper etc using bought in items probably made by wilmot breeden, I can probably find one in my stock , but it should be an universally available part, if you still cannot find it let me know the size & i will reply, Phil Anglesey UK Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted September 11, 2017 Author Share Posted September 11, 2017 Sorry to not report back. I was able to fabricate another spring to work in the latch assembly. Matt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now