rlcokc Posted July 12, 2016 Share Posted July 12, 2016 Anyone used Lizard Skin ceramic insulation in restoration. I like the idea of the spray on and not using dynamat or equivalent. Easy to apply? Would not be seen for most part and would seem to replicate to some extent the asphalt impregnated material originally used. Thoughts, experience or suggestions? Thanks Link to comment Share on other sites More sharing options...
g-g-g0 Posted July 12, 2016 Share Posted July 12, 2016 Can't answer all your questions but this product was applied to my 1957 Buick Restomod Project (see thread in Performance/Modified Forum) today. Decided to go this route for a couple of reasons. Cheaper and lighter than Dynamat, easier to install/apply and seals all joints. Stuff appears to be tough as nails! Coated complete inside of the body plus a strip over the tread pattern in the wheel wells. Does require their gun to apply and need 70 PSI. Gun cost is about $75 bucks. Clean gun immediately or you will need to buy a second gun! 1 Link to comment Share on other sites More sharing options...
rlcokc Posted July 13, 2016 Author Share Posted July 13, 2016 Thanks for response and info. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now