Guest u571 Posted January 12, 2016 Share Posted January 12, 2016 I recently got my riv back from having a turn signal issue resolved and an indicator bulb replaced because I couldn't get my hand in there far enough for the right side, although I painfully changed the left side. Now my horn doesn't work but I hear a buzzing at the relay? when I apply the horn bar. I also have the 4 note set up but those two trumpets never worked even though I rebuilt them-and they sure do look cool even though they don't work. Anyone have a suggestion? I know the mechanic had the steering wheel off to adjust the signal switch.Thanks, Mark Link to comment Share on other sites More sharing options...
Seafoam65 Posted January 12, 2016 Share Posted January 12, 2016 I would start by going out under the hood and grounding the prong on the horn relay on the left fenderwell thatthe wire from the steering column goes to and see if the horns honk. If they do, you aren't getting a good enough ground from the steering wheel to operate the horns. In that case I'd pull the steering wheel and check the horn contact under the wheel for any problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now