P6tu Posted June 19, 2015 Share Posted June 19, 2015 Hello, I'm looking for downsized 0,040 crankshaft bearings for 1958 Buick Super Riviera 364CID 6,0L nailhead.Any information on how to get them or whome to contact,will also be appreciated.You may also contact me directly to my e-mail. PS! If someone has a good crank to offer,then it is also accepted.PS! I have the same topic in the general buy/sell forums,so moderators,please do not take this as a spambot =).Thank you . With the best regards,Roland Link to comment Share on other sites More sharing options...
Pete Phillips Posted June 19, 2015 Share Posted June 19, 2015 I have a good 1958 364 crankshaft, but the shipping would be very expensive.Pete Phillips, BCA #7338Leonard, Texas Link to comment Share on other sites More sharing options...
P6tu Posted June 19, 2015 Author Share Posted June 19, 2015 Hello Pete, Yes,I'm aware,that the shipping would be expencive (arount 200$).How much the crank should be downsized to get it in decent shape (I doupt that it could be used with standard bearings).And since I've encountered one crankshaft that looked to be in good condition,but after inspection it turned out to be out of center (bent) and I did not want that crank,then I need a solid statement that it really is in usable condition. So do not be shy and name your price for the crankshaft (if you are 110% sure that it is in usable condition). With the best regards,Roland I have a good 1958 364 crankshaft, but the shipping would be very expensive.Pete Phillips, BCA #7338Leonard, Texas Link to comment Share on other sites More sharing options...
Pete Phillips Posted June 20, 2015 Share Posted June 20, 2015 I will take some measurements of the crankshaft when I return from vacation after June 29.Pete Link to comment Share on other sites More sharing options...
P6tu Posted June 24, 2015 Author Share Posted June 24, 2015 Noted =).I will take some measurements of the crankshaft when I return from vacation after June 29.Pete Link to comment Share on other sites More sharing options...
P6tu Posted July 2, 2015 Author Share Posted July 2, 2015 Bearings aquired - probably the last ones on earth . Thank you everyone for your attention =). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now