Guest jef1956 Posted April 28, 2015 Share Posted April 28, 2015 is there anything special one should know about replacing a speedometer cable? I put a new cable on just screwed the ends on, speedometer still does not work. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted April 28, 2015 Share Posted April 28, 2015 The square end of the inner cable must go into the drive and sometimes it takes a bit of fiddling around before it lines up. But, if you got the cable on and tightened up the ends must be in.Other than that there is nothing. You could take the top end off the speedo and watch it as you drive. If it turns you know the drive is working and the problem must be the speedo. If not it must be the drive end at the transmission.You do have the drive gear in the transmission? They can be easily replaced if necessary. Link to comment Share on other sites More sharing options...
Guest jef1956 Posted April 28, 2015 Share Posted April 28, 2015 Thanks Rusty Link to comment Share on other sites More sharing options...
Rusty_OToole Posted April 28, 2015 Share Posted April 28, 2015 You are welcome. Let me know how you make out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now