Guest Posted October 14, 2001 Share Posted October 14, 2001 Can anyone direct me to a vendor who does a GOOD job of porcelainizing manifolds ?<BR>I would really appreciate any help either positive or negative.<P>Ray Link to comment Share on other sites More sharing options...
Guest Posted October 15, 2001 Share Posted October 15, 2001 I have used both Coker (of tire fame) and the people in the west whose name eludes me and both did an excellent job. Link to comment Share on other sites More sharing options...
Rick Hoover Posted October 15, 2001 Share Posted October 15, 2001 I have been using Prairie Auto Porcelain from Northfield, MN. for years with great satifaction. Their number is 507-645-5325. Give them a try.<P> FYI~ Coker Tire no longer handles a porcelian service. They did as Terry said, offer a good service when they were doing it.<P>Rick Link to comment Share on other sites More sharing options...
Guest Posted October 15, 2001 Share Posted October 15, 2001 I met those guys from Prairie at Pebble Beach a couple years ago. I think they know their stuff. <P>Nevertheless, if its a road car you're working on, be aware that even the best porcelainizing flakes off quick under normal conditions. There are alternatives for non-show cars, sort of a black metallic coating. Sorry that isn't too technical, just trying to make aware. Link to comment Share on other sites More sharing options...
Guest Posted October 16, 2001 Share Posted October 16, 2001 Prairie is the co. I was thinking of.Sounds like it should be out west. Porcelain seems to be a very odd material; I have seen it last for 20 years on a driven car and barely flake, but I have also seen it come off a car the 3rd time it ran. Link to comment Share on other sites More sharing options...
Guest Posted October 17, 2001 Share Posted October 17, 2001 Wow what great service! Thank you very much Rick, Bill and Terry. We will contact Prairie and discuss their service. The Packard will definitely be a show car so we will most likely take our chances with Porcelain.<BR>Ray Link to comment Share on other sites More sharing options...
Guest Posted October 20, 2001 Share Posted October 20, 2001 Has anyone besides me ever used black chrome on exhaust manifolds? I had it done on my '41 Cadillac almost 20 years ago and it is still as good as when it was first done. And that car is driven and the manifolds get HOT.<P>Mine was done by Qualchrome, but I have heard the service is no longer available. Does anyone know of anybody doing that process today. I understood there were some EPA problems. ~ hvs Link to comment Share on other sites More sharing options...
Peter J.Heizmann Posted October 20, 2001 Share Posted October 20, 2001 Ray - I am in the foundry & machine shop business. We have quite a bit of experience in porcelainizing (glassing). We did a lot of research when doing a large job for burner venturi "caps" for kitchen ranges.<P>If there is any major tip I can give you from the "range" project, is, make sure every and all nibs of the cast iron granular texture are sanded down. What happens is the part will look good at all even areas, but, the nibs will not get coated well and look rough. Also, make sure the parting line (seam) is ground down flush with the casting surface as this to will not glass well, and, will flake in that area.<P>Basically, any sharp granular areas act like a mini volcano. To porcelain, the part is pre-heated to about 1500 degrees. We pour cast iron in electric furnaces at 2650 degrees. Metallurgically, at 1500 degrees the molecular structure starts to loosen up.<BR>The nibs/protrusions will then out-gas like a mini volcano. Then when glassing, you have a sharp / rough area.<P>The other mandatory tip is make sure the vendor sand blasts the part real well (or even Wheelabrate it with steel shot).<P>My company used:<P> Prizer-Painter Co.<BR> 600 Arlington St.<BR> Reading, PA<BR> (610-376-7479)<P>I have seen them doing many manifolds. By the way, I get down your way quite a bit. If you like, I offer to meet you and hand deliver them if you opt to go this route.<P>Regards,<P>Peter J.<p>[ 10-20-2001: Message edited by: Peter J Heizmann ] Link to comment Share on other sites More sharing options...
Guest Posted October 25, 2001 Share Posted October 25, 2001 Hello Peter J,<P>Thank you very much for your input. We are capable of doing the prefinishing and glass beading. We will do so and I will talk to folks in Reading. I am partial to Pennsylvania workmanship due to having lived there for many years. <P>I like chrome bumper TR-6s They are really fun cars.<P>Ray Castelhano Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now