Guest ingvar Posted November 7, 2013 Share Posted November 7, 2013 Hi.I have an old Dodge Truck, its build in Kew Gardens, Surrey England.I think it's 1951 modelSerial no 20640Model 105ALEngine no T315.234 6.0LCan anyone tell me more about this car, and if it has any value?Best regardsIngvar Link to comment Share on other sites More sharing options...
TerryB Posted November 8, 2013 Share Posted November 8, 2013 Can you post a picture of the truck? That would help with ID and value.Terry Link to comment Share on other sites More sharing options...
Guest Richie09 Posted November 10, 2013 Share Posted November 10, 2013 Hi, these model and serial numbers (of the truck) do not follow any, made in, USA or Canada. I would do the searching of those numbers with Kew.But with the engine number, comes very close in that '51-'53 years. there was T314xxx and T316xxx listed as Dodge truck, but no T315xxx.It seems the decimal used with Kew were used as a "star" with USA or Canada....also I read in the 6.0L box shown in the picture to me as 6.CL, as if they indicate 6 cyl. (tax info.).The T137.com was helpful someshat but like I said, this info. on the plate was generated by Kew so going to find their records is going to put you on this truck. Must be kind of big with 8400 gross. Let us know what you find, hope this helps, Richie Link to comment Share on other sites More sharing options...
TerryB Posted November 11, 2013 Share Posted November 11, 2013 Dodge did make some big 6 cyl engines in the US during this time so the 6.0L as in Liter may be correct. In my parts books I found a 377ci for the Dodge 4 ton US trucks and a 331ci 6cyl for the 2 and 3 ton models. 377ci would be slightly larger than 6.0L but close. Terry Link to comment Share on other sites More sharing options...
Chrycoman Posted November 11, 2013 Share Posted November 11, 2013 T315 was used in Canada - 250.6-cid engine - on Canadian-built 3 Ton Dodge, Fargo and DeSoto trucks. DeSoto trucks were export only. The Engineering Department codes were used throughout the Chrysler firm, at least prior to the 1970's. Chrysler UK used the Engineering Dept model year letter to denote the model yeat on the serial number, as did Simca and Rootes around 1970.I suspect the cab is a unique design as the British Dodge Truck used different styling. Link to comment Share on other sites More sharing options...
Guest Richie09 Posted November 11, 2013 Share Posted November 11, 2013 Hello Ingvar, The reason I looked closer at the picture was I looked for a Mopar 6.0L (366 c.i.) and not in the history, but what Kew used, I have no idea. The T315.234 should put it on the year (if it is origional engine) and it does seem to be.I have included a link to the UK group which may be a good contact for better details of the UK Kew Dodge.Regards, Richiehttp://www.old-dodge-trucks.co.uk/dodge_kew.htmA picture of your truck would be appreciated, Thanks Link to comment Share on other sites More sharing options...
Guest ingvar Posted November 12, 2013 Share Posted November 12, 2013 Hi Richie.I'm looking a bit closer on the plate now, it was a bit rusty, it's like you said 6.CL. The car is my garage haven't been used or done anything with it for the last 40 years. I'll try to post some pictures soon. Link to comment Share on other sites More sharing options...
Guest cliveshepherd Posted June 28, 2015 Share Posted June 28, 2015 Hi, I also have a British Fargo F64 Engine number T315 1738CL - it may be a canadian engine 1951 or 52. Any assistance in identifying the manufacturing year would be appreciated. Thanks Clive Link to comment Share on other sites More sharing options...
Chrycoman Posted July 12, 2015 Share Posted July 12, 2015 Did some more digging on the T315 engine. It was a 250.6-cid 25" block flathead six used in Canadian-built Dodge, Fargo and DeSoto trucks. The T315 engine was used in 1951-52 on models - Dodge Truck - DG-3 - 1-½ tonDodge Truck - DG-4 - 2 tonFargo Truck - FO-3 - 1-½ tonFargo Truck - FO-4 - 2 tonDeSoto Truck - SC-4 - 2 ton And again in 1953 - Dodge Truck - DH-4 - 2 tonFargo Truck - FP-4 - 2 tonDeSoto Truck - SD-4 - 2 ton The engine in 1951-52 had a 6.8:1 compression putting out 110bhp @ 3600 rpm and torque of 192 ft-lbs @ 1200 rpm In 1953 the bhp went up to 118 while the torque went to 210 ft-lbs. Of course, the above output figures are for Canadian production The British plant probably had different figures, including the compression ratio. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now