Intake/Exhaust Manifold ID

[Davenport]

I took this manifold out of my 36 Dodge. I was told the engine in the Dodge was a 49 Plymouth. Trying to see what this manifold goes to the car or goes to the engine. A casting# on the exhaust is 60 450-7. Casting # on the intake is 868410-1. <-as best as I could make out.

Also question on the water pump. The only # I see on that is 280. Thanks for any info.

[Davenport]

Any more info I could try to provide to Id these parts ?

[nzcarnerd]

If the engine is from a Plymouth its engine number should start with a P and a number which denotes the model.

[Guest Commodore]

It looks like you have orginal 1936 manifolds. See this post for a discussion on Chrysler Six manifolds.

http://forums.aaca.org/f145/very-rare-chrysler-plymouth-exhaust-manifold-356395.html

[keiser31]

It looks like you have orginal 1936 manifolds. See this post for a discussion on Chrysler Six manifolds.

http://forums.aaca.org/f145/very-rare-chrysler-plymouth-exhaust-manifold-356395.html

Those look different at the rear to me.

[Guest Commodore]

Yes that's became the photo in the post is for 1938 not 1936. But for sure he does not have 1949 Plymouth manifolds.

ON your water pump can we get a photo of the other side?

[Davenport]

ON your water pump can we get a photo of the other side?

[Guest Commodore]

OK, your water pump is for Chrysler product flat-head six. I believe it is from the 1936 engine because it does not have heater connection like the 1949 Plymouth water pump I show in the photos.

[Davenport]

Thanks Commodore. Maybe the manifolds are from the 36 also. I keep searching for pics but, not having very convincing results.