Fastfret Posted May 24, 2013 Share Posted May 24, 2013 I have a 1936 Buick Sport Coupe...I am looking for some wiper arms, but so far have not found any. I see Fusick Antique Auto Part has them for 1936-38 Oldsmobiles...Does any one know if these will work on my 1936 Buick? Thx Link to comment Share on other sites More sharing options...
Guest Grant Magrath Posted May 24, 2013 Share Posted May 24, 2013 Try Bobs Automobilia. They'll have the right ones for you.CheersGrantPS Bob, if you're monitoring this forum, see how I recommended you? How about waiving that dollar limit on purchases!!!!! Link to comment Share on other sites More sharing options...
Fastfret Posted May 24, 2013 Author Share Posted May 24, 2013 Thanks...I'll give him a try... Link to comment Share on other sites More sharing options...
Guest mclbuick2002 Posted May 25, 2013 Share Posted May 25, 2013 Try Bobs Automobilia. They'll have the right ones for you.CheersGrantPS Bob, if you're monitoring this forum, see how I recommended you? How about waiving that dollar limit on purchases!!!!!Grant Bob's does not have the correct one for either of I my 1936 -40series.In 1936 there were 2 types of wipers . A splined drive shaft which Bob's used to have which I think is out of stock . The OLds restoration supplier still stocks.The other type slides over a round knob with a locking nut .Look at drive on your wiper . Is it a splined shaft or a round knob.Stan Link to comment Share on other sites More sharing options...
Fastfret Posted May 25, 2013 Author Share Posted May 25, 2013 Thanks for the info...Here is my problem...my 36 coupe has two different wiper blades on it. When I went to remove them, the driver's side uses a splined shaft and the acorn nut...The passenger side had a spline shaft that somone had appeared to have drilled and installed a pin to lock it in place on the shaft...So I really have a slight problem to deal with, as both side are different... Link to comment Share on other sites More sharing options...
Guest Grant Magrath Posted May 25, 2013 Share Posted May 25, 2013 Sounds like a new wiper transmission might be in order as well? I wonder if the mid thirties Chevies used the same wiper arms? Chevs of the 40's or The Filling Station might have something.CheersGrant Link to comment Share on other sites More sharing options...
Mark Shaw Posted May 27, 2013 Share Posted May 27, 2013 Try this page...https://www.chevsofthe40s.com/shop/search.lasso?search=wiper++arm&year=All&dept=Car&searchtype=FT&Go=Go Link to comment Share on other sites More sharing options...
Guest mclbuick2002 Posted May 28, 2013 Share Posted May 28, 2013 Try this page...https://www.chevsofthe40s.com/shop/search.lasso?search=wiper++arm&year=All&dept=Car&searchtype=FT&Go=GoMarkNone of those chev wiper arms will fit on my early 36 production wiper drives.The early drives had a nut that slides onto round drive shaft with male threads facing out . These are threaded into wiper arm and clamp onto drive when tightened.Stan Link to comment Share on other sites More sharing options...
Guest Grant Magrath Posted May 28, 2013 Share Posted May 28, 2013 One more link. Might be worth a look.1929-54 Chevrolet Parts & AccessoriesCheersGrant Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now