Guest caprice350 Posted February 27, 2013 Share Posted February 27, 2013 Hi how to remove the adjust knob on the clock on a -65 riv just pull or ? Link to comment Share on other sites More sharing options...
RivNut Posted February 27, 2013 Share Posted February 27, 2013 NO! don't pull. It's threaded on. Take the back off the clock then with a very small pair of needle nose pliers, reach in and grip the shaft. Holding the shaft securely, you can unthread the knob, At least that's the way I've done it in the past; others may have different methods.Ed Link to comment Share on other sites More sharing options...
Guest caprice350 Posted February 27, 2013 Share Posted February 27, 2013 Ok thank you it was easy when you know how to do the clock works perfect after some cleaning and lubing i have run it for 26 hours now Link to comment Share on other sites More sharing options...
petelempert Posted February 27, 2013 Share Posted February 27, 2013 Finesse alway wins out over brute force. BTW-How does the clock come out of the dash? I saw a post a while back on it...but now I can't find it. Thx PRL Link to comment Share on other sites More sharing options...
RivNut Posted February 28, 2013 Share Posted February 28, 2013 It pulls out from the front AFTER you twist it counter clockwise. There will be one 12V wire connected to the clock and a wire with a lamp attached to it that you'll have to becareful with. Don't let them fall back into the dash.Ed Link to comment Share on other sites More sharing options...
petelempert Posted February 28, 2013 Share Posted February 28, 2013 Thx Ed. PRL Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now