Jump to content

Rear sway bar bushings?


D-a-n-i-e-l

Recommended Posts

I used energy suspention sway bar linkage bushings. Drilled the centers out to .5 inch (put the bushing in a 26mm socket to hold it in place) Then use a bench grinder to etch out the nipples to mach the sway bar hole and ground down to proper length.

Link to comment
Share on other sites

No issue, it ended up costing $70 to fix, and did not have to pull the tranny.

One other note it takes two bushings per side. That is my worry about the fix. I have put 150 miles on them and still in place I will keep an eye on them and if they give out or let the swaybar drop to the bolt I will post on here.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...