Otahuhu Posted July 8, 2011 Share Posted July 8, 2011 Looking to make some drag link and tie rod ball joints and cups sets as found on my car. Once I setup to run my requirements can run more off Is there any one interested in a set for their Model M ? Cost will depend on the number run off . Will be using EN 39 Steel Don't intend to make the springs that go with these parts Link to comment Share on other sites More sharing options...
stutzl6 Posted July 10, 2011 Share Posted July 10, 2011 HI The draglink cup, spring and nut . I think is the same as model 70 oliver tractor made 1935 to 48 They did not use the ball post . The nut dia is 1.250 The steering box shaft used the same timken brg as 1929 and up stutz steering box . Nothing else is the same. If you make the ball post I would be interested in some ,what price . If you want to write to me Iam stutz member 107 or FAX no 8604890614 Link to comment Share on other sites More sharing options...
Otahuhu Posted July 10, 2011 Author Share Posted July 10, 2011 I am a Stutz member # 0527 my contact details in the membership directory. Thanks for info will check out Oliver parts The ball cost will depend on number run off .How many are you looking for? These ,should be a seller at Hersey? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now