Guest Debra_Taylor Posted September 23, 2010 Share Posted September 23, 2010 Does anyone know how to fix the power door locks on a 1990 Buick Reatta? The door is stuck in the locked position with the door OPEN. How can I get the lock to release so I can close the door? Link to comment Share on other sites More sharing options...
Shop Rat Posted September 23, 2010 Share Posted September 23, 2010 Hi Debra and welcome to the AACA forums.You might want to scroll down and post this on the Reatta Forum. You will probably get help faster there. Good luck. Link to comment Share on other sites More sharing options...
Larry Schramm Posted September 24, 2010 Share Posted September 24, 2010 Did the striker latch flip over on the door so the door will not close close to the body? If that is the case, just pull on the door handle like you are going to open the door and flip the little latch on the door back into position. Look at the other door to see if the latches look the same. If it looks different, then that is probably your problem. Link to comment Share on other sites More sharing options...
Guest Debra_Taylor Posted September 24, 2010 Share Posted September 24, 2010 Thanks Larry - that did the trick. Now ... any help on changing the headlights? Link to comment Share on other sites More sharing options...
Larry Schramm Posted September 24, 2010 Share Posted September 24, 2010 What is wrong with the headlights? Are they burned out or do they not go up and down? If the problem is that they will not go up and down, there is a ton of information on how to fix them. There are kits to replace the gears that usually are the problem. Link to comment Share on other sites More sharing options...
jscheib Posted September 24, 2010 Share Posted September 24, 2010 Debra,Again, you should psse that question, if not already done on the Reatta site, under Buick as you scroll down on the different forums.John Link to comment Share on other sites More sharing options...
Guest Debra_Taylor Posted September 24, 2010 Share Posted September 24, 2010 The are just burned out and I just need to take the old ones out and put in the new ones I bought on line. The auto shop wants to charge $90 to do this and I am trying to save some money and do it myself. Link to comment Share on other sites More sharing options...
Guest Richard D Posted September 26, 2010 Share Posted September 26, 2010 Do a search on the Reatta forum there are instructions with pictures. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now