jerry1centmi Posted September 5, 2007 Share Posted September 5, 2007 I am finally starting to work on a Model A that I bought many year ago and stored. My first step was to remove the engine to check the clutch. When the engine tipped up to slide out of the compartment a lot of oil drained from the pan onto the floor. I have the flywheel off now and their doesn't seem to be a hole that the oil could come from. Is a new rear seal required or what would cause this? Link to comment Share on other sites More sharing options...
JFranklin Posted September 5, 2007 Share Posted September 5, 2007 The trick is to drain the pan first as the model A did not have any rear seal on the crankshaft. The bearing clearance in tolerance and a drain-back tube is what keeps the oil in somewhat Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now