Jump to content

oldwood

Members
  • Posts

    219
  • Joined

  • Last visited

Posts posted by oldwood

  1. I have a '64 Pontiac Catalina Safari Station Wagon for sale. It is a 6 Passenger with a 389/2bbl engine. It has a RARE 3 on the tree transmission. This car starts and runs but it needs brake work. The drivers floor pan has a rust hole. The rest of the car is solid. $3250.00 Call anytime 501-626-zero zero six 7. Call me anytime and I can email some pictures.

  2. I've been trying to find these blinker/back-up light grills since I bought my 1st '50 Buick. I saw these on ebay on 2 differenty listing by the same person. There were still attached to the bumperettes. By the time I hit the "buy it now" the rear set had been sold. I did get the front. I ask the seller to forward the ebayer who bought the rear and he forward the info to me. I was able to buy the rear set for $15.00. They are rough but they will be restored for my "Baby Blue '50".post-56630-143139211146_thumb.jpgI was only able to post 2 pics

    post-56630-143139211141_thumb.jpg

  3. This is a great story,Congrats. I have some concerns as I also got one running after it sat for 20+ years. The oil in my '50 had turned to grease. The oil pan had spider holes in it from condensation(water) sitting in the bottom of the oil pan. The oil had dried in the rocker arm assembly and I had to take it all apart and cleaned it so it oiled the valvetrain. I know you want to get it up and going but don't get in a hurry or it may bite ya in the arse. Please look at my pics of oil in my oil pan pics. These pics are in my photos under "oldwood". Call me anytime if ya have questions.

  4. It is a 4dr sedan ie. post car. I'm not sure if its a special or super because I didn't find and name tags on it. I can get pics and post unless there's something you can tell me that will make it easier. Thanks for your help.

  5. If your unsure if the heat riser flap is open or closed disconnect the exhaust pipe from manifold and look up in the outlet. Mine was partially closed and I opened it up with a pry bar. If its closed you will over heat the manifold and it will crack.

  6. How fast can you push a '50 buick and not hurt it ie. the dynaslow tranny. I just googled this event and its a little over 7hrs from Little Rock. I would need to RandR my Torque tube seal. How many hrs does it take to do this job??? The cooler weather is a plus. This is my bucket of bolts!!!

    post-56630-143138789332_thumb.jpg

×
×
  • Create New...