jonlabree
-
Posts
2,840 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by jonlabree
-
-
Hey Jim, You have green grass? or is that astro turf.
-
It's much safer with the aftermarket harness.
-
1
-
-
There are two gaskets, one at each end. They are usually very hard and brittle.
Hard to reform to fit. Jim Finn may be able to help you.
-
No deep scratches correct? I will call you tomorrow 10/12. I would like to see them if that's alright with you.
-
Are all of the mounts there? Do they have any deep scratches? Any cracks or splits in them?
-
Daniel. I am looking for a good tail light. One with all the mounts still intact and no broken pieces. The lens must be repairable. Can you help?
-
I have been trying to contact this gentleman about the tail Lights, but have not gotten areply about pictures of them. Please contact me.
-
Yes, the cadillac one that looks like the Reatta fob will work.
Just program it like it was for the Reatta.
-
If you dislike it so much, get rid of it.
-
Jim, I had the same probleme a few months ago.
I also replaces all sensors with no luck.
Check and adjust your TPS reading, THen check the resistance of your IAC.
Mine was new and it had a bad reading on one side.
Good luck.
-
I wonder if he still has the Reatta engine. The first pictures are of a Grand National engine. Valve cover hold downs are completly different on the normal Buick engine and the heads are Not interchangeable.
-
1
-
-
Have you run the test that is on the page you posted?. Second paragraph from the bottom.
Check the coils A&B and C&D with a voltmeter on resistants.
-
I had a bad connector and a bad IAC. I checked the connector first and replaced it. Then checked the IAC with a voltmeter.
The readings are in the manual. and found one side of the IAC was bad. Replaced with another and all is well.
-
I just went thru the same problem. Replaced all the sensors and still had the same problem.
!st make sure the TPS is set correct. Then remove the plug form the IAC and check the readings
using a voltmeter. You can find the readings in the manual.
I had a new IAC and half of it was not working. I tested anther and found it to be good.
It solved my problem.
-
You can find them at a junkyard.
-
1
-
-
Get a large plastic cup, larger than the filter. Crack the filter loose and then put the cup over it and remove.
The hot oil stays in the cup along with the filter.
-
2
-
-
Thank you I will.
-
No, I mean what does the code mean?
-
It is history. I just don't know what it means.
-
I got an error code B552. When I looked it up the comment was "Memory reset indicator".
Any idea what that means?
-
8D-16 override displays.
ES09 IAC motor.
But how do you lock it in?
-
Using the computer, I cut down the idle to where I want. Now how do I lock that setting in so it won't change when I restart it.?
Please anyone.
-
Still having idling problems. When the A/C is on the engine idles quite fast, around 1300 to 1400 rpms.
When the air is turned off the idle returns to normal around 750 to 800 rpms.
What sensor controls the idle when the air is turned on and off?
Anyone?
-
I'm thinking that you have the wrong ICM. Check the plug against the one in your other car that runs.
Favorite Pictures of My Buick Reatta
in Buick Reatta
Posted
Here is my 90.