Jump to content

Glassesguy

Members
  • Posts

    848
  • Joined

  • Last visited

Posts posted by Glassesguy

  1. On 9/3/2023 at 6:05 PM, EmTee said:

    That could still be the case here with @roadmaster_56's car.  Isn't there a second serial number on the front of the block hidden behind the water pump?  If so and if that is blank (missing) that might suggest that this is indeed a replacement block installed by a Buick dealer's service department.  Aside from that, the only way to know for sure would be to find documentation hiding somewhere inside the car (e.g., under a seat).

    Agree on the serial number behind the water pump. 

    • Like 1
    • Thanks 1
  2. Very saddened to just learn of Bill's passing. His contributions to the betterment of the BCA were immense. Followed his restoration of the 50 Estate Wagon with great interest. May he rest in peace and somehow know how much he will be missed.

    • Like 2
  3. I have used hydraulic jack oil in my prewar Buicks through the years.  I'm told, though, that some restorers use front fork oil sold at motorcycle shops. 

    No personal experience with this. 

    • Like 1
  4. On 12/21/2021 at 1:03 PM, billbuickgs said:

    Thanks,

     Some early 320's had more of a round shape doom, think my 40 Crntury was like that .

    Bill

    Correct. Bill. 37 through 40 had slight dome shape and no vents. 41 through 52 were much flatter and had 4 stamped in vents to control condensation that could short out the uninsulated spark plug wire ends

  5. For 1965 Lesabre engines are 300 cubic inches.  2 versions available.  Base version used a 2 bbl carb.  210 HP. 3 speed column shift or ST 300 auto trans.  Lesabre 400 option got you the 4 bbl carb rated at 250 HP plus the ST 400 3speed automatic plus dual exhaust.   For the 401  cubic inch engine you moved up to the Wildcat.

    John D1956 correct on the rarity of the factory AM FM due to the curved radio dial.  I got one years ago from an Electra being parted out. Hope your Riv engine turns out well.

    • Like 1
  6. Pete: I know I am late to the party on this topic as you have solved your problem. Just had to comment, though.  The  A429 on the flange is a rebuild # stamped on by the rebuilder. Airtex maybe??  Most rebuilders ground off the OEM # stamped on the flange and put on their own. As Matt Hinson nicely posted the picture of the Service Bulletin, Buick changed the original "W" series AC pump (which interchanges with the 37-52 Chevy), to the inverted bowl AF series after around 40,000 engines were used.

    This same AF series pump was used on 1939 series 40 for one year. 1940 saw the use of the combination AJ series pump on the Series 40 and later.  

    Out of curiosity do the numbers stamped on the block show that it is a 38 engine?

    Great Bugle by the way.

     

     

     

     

     

×
×
  • Create New...