imported_Big Mark
-
Posts
155 -
Joined
-
Last visited
Never
Content Type
Forums
Gallery
Events
Posts posted by imported_Big Mark
-
-
You may be able to reuse thouse parts
ask the welder he might have some ideas
If he's good let me know I need one myself, Mark
-
do you have any 20" disks? Thanks, Mark
-
Try this link Dave. http://www.evanscooling.com/catalog/C_npg1.htm
-
That's an old Army trick Dave, I can't tell you how many Duce and a half tires I mounted the same way.
I hope the tires serve you well. Now you can move the car alot more easy. Good Luck, Mark
-
When you find the 20 inch your looking for. Would you be willing to sell me the 16 inch? Thanks, Mark
-
Right, Just about all the dodge cars are very noisy in 2nd gear. 1st & 3rd are pritty quiet, then you hear the rear end start to wine.
-
Use a spoon tire iron to pry gently outward, while you step on the split ring into place. start at one end (the end without the notch)
it works best when you have two people
once the ring is seated ... be very carefull inflating the tire stand away from the tire and fill it slowly
-
Here are some pics of my 1923 Dodge Station Wagon
send some of yours mark.ounan@us.army.mil Thanks, Mark
-
I just turn the key to the right and then hit the starter button on the floor. and it starts.
when I WANT TO KILL THE ENGINE I just turn the key from the right to the left or from the 2 o'clock position to the 10 o'clock position ant the engine turns off.
I don't have to turn the light lever at all. Uless I am turning in the lights. My cars are earlyer so maybe it's different. 1916 and 1923
-
Both of my cars just turn about 1/4th turn
From about the 10 o'clock position to about the 2 o'clock position. this just complete's the ignition circuitand then you have to push the starter button on the floor to start the engine.
What year and model is your car?
can you send a picture of the new key?
I need some made too and would like to see his work
Thanks, Mark
-
Hi Actor, do you have any pictures of your car?
I also have a 23 . I call it a "Station Wagon" because it's just too nice to call it a Hack .
I would like to see it Thanks , Mark
-
-
-
send me a pic of the strip and the back of the seat
-
My 16 Touring has the same turn key Military type gromets for the top. so does my 18. these are original.
the wood strip is to attach the lether seat coushen to the car. and should not be seen when is done.
I'll try to take some pics Mark
-
That's more than I can dijest. I was hopeing to find an open touring car with a fast four engine because I want to tour at seeds greater then 35 mph. I thought the 5 main bearings would make for a more speed. Is that correct?
I can't take my 16 on tours because it can't keep up with the cars from the 20's and 30's
What are the last and fastest 4 door touring cars that Dodge Brothers made?
Thanks for all the info Dave
-
Run it again, When it quits, check the bowl on the carb.
if it's dry then the trouble is between the v tank and thr carb. The tank may be full but not giving the gass to the carb. Good Luck, Mark
-
Do you want to sell the disks?
I'll buy them no problem
Thanks, Mark
-
Grey linolium is the right covering for the running boards and the floor boards.
Good luck, Mark
-
Thats not a bad idea Billy, But does anyone have a disenbodied Fast Four engine for sale?
and what year frames will it fit in?
I was advised that my 17 frame and body were too diferent to work easy Do you know?
-
I have no springs on my 16, 17 or 18 ether.
just a spacer and then the nut
-
-
Mine are at 65 psi
But if your not sure, call Universal Vintage Tires in Hershey PA. They are the pros and should be able to tell you.
1-800-233-3827
2994 Elizabethtown Road
Hershey, PA 17033
sales@universaltire.com Good luck, Mark
-
thanks
1926 Screen side on Ebay
in Dodge & Dodge Brothers
Posted
Here's a nice 26 Screen side... for not much money
it's on ebay . It's in California. , good luck
1926 Vintage fruit delivery vehicle. does not run, stuck. needs restoration.
Item number: 190268610279