Jump to content

Carbuff2

Members
  • Posts

    853
  • Joined

  • Last visited

Posts posted by Carbuff2

  1. SOLD. SOLD SOLDI have for sale a Beautiful Walnut Grained STEERING WHEEL for 1964, 1965, 1966 Rivieras as well as many others like the Wildcat etc.  The condition of this wheel is very good, the chrome is good, and it is complete with the adapter, the center cap, THE HARD TO FIND HORN BAR, and I believe that all the contacts inside are there.  I have listed it on ebay if you want to bid on it, I also have posted more hi-resolution pictures on the posting because the limit on this forum does not allow many pictures to be posted.  The price complete is $1050. plus shipping which is probably about $17.00 and I will accept checks, money orders, paypal or can send an invoice so you can use a credit card.  Thanks Paul 

    DSC_0022.JPG

    • Like 1
  2. I have a BLACK FACTORY STEERING WHEEL that came off of a Skylark Gran Sport …. I have seen this same wheel in many other Buicks both Special, Skylark and full sized Buicks.  This one is very nice and does not have the large cracks and gaping holes that 

    most have.  There are a few chips from storage and hairline cracks.  The price is $375 plus $17.50 shipping.   Please look at the pictures and if interested contact me.  Paul through this forum, email 65skyriv19@att.net or text 559 355-3551

    This is also listed on ebay if you wish to bid on it there are also more pictures as this forum does not allow anymore due to their limits.  

    DSC_0032.JPG

  3. Make it simple ….. give a complete description of cars condition, confirm that the engine is a numbers matching LX code motor and that there is or isn't rust, how it runs , include pictures,  lastly WHAT DO YOU WANT FOR THE CAR.

    Is this car in Long Beach?? give information that all goes to someone showing an interest in your car.  Good LUck Paul 559 355-3551 

  4. I need to purchase the transmission for the passenger side seat of my 1982 Riviera, I understand that the Riviera, Eldorado and Toronado all used the same power seat assemble, however I am including a picture of mine for comparison.

    I will purchase the motor, transmission and cables if that is how you want to sell them.  Mine as you can see the Plastic housing that holds the gears broke and the two gears fell out.  

    Paul Duran ROA#376 phone or text me 559 355-3551, PMessage me, contact me through this forum, or email me 65skyriv19@att.net …….. I need help soon as my upholstery is being done and I do not want to install the seat without this part.

    seat motor 82-1.jpg

    seat motor 82-2.jpg

  5. Thanks for all the responses and pictures, gauges are great but you do have to find a place to install them.  I like the

    one  under the ashtray door on the console so it does not distract from the original look of the car, I also like the

    electric Oil and Temp Gauges so no oil or water would be inside my car with the possibility of them leaking.

    Thanks to all that contributed.  Paul

    • Like 1
  6. I spoke with Tony at Vintage Air very helpful but had suggestions, no kit available, is sending me a kit so I can select what parts I think that I will need so I can order.  Was hoping someone has done this before and may have some info to share as to what to order.  I do have an A/C shop that will do the installation, but want me to supply the Air Conditioning parts.  Thanks for your reply.  Paul

×
×
  • Create New...