stude24
-
Posts
214 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by stude24
-
-
I have one NOS 283 "B" head that was in a Studebaker dealer inventory. Studebaker used GM engines in 1965 and 1966 when production was moved to Canada. This is in the original GM box and has some light surface rust from storage. I gave it a coating of WD 40. Attached are some photos.
-
For Sale NORS Dorman CB-18 Throwout Bearing, replacement for GM part number 150250. Fits:
1932-39 Oldsmobile
1934 Buick - Series 40
1934-36 Lasalle
Shipping via USPS. $60 plus $10 shipping. PayPal preferred, but will accept USPS money order. Contact me with any questions. Dan
-
For Sale 1929 - 1937 NOS Chevrolet Throwout bearing, GM part number 837021. Fits all Chevys with carbon bearing, except 1933 - 1934 Master. No box. Shipping via USPS. $60 plus $10 shipping. PayPal preferred, but will accept USPS money order. Contact me with any questions. Dan
-
Does anyone out there currently own or know the whereabouts of Studebaker President Serial No. 6000859, Body FAW 3-260, Engine FA 964, sold new on 01/07/28? If so I have some interesting literature for your car.
-
1
-
-
1968 Cadillac Dash (Please check to insure this the correct application for your vehicle). This appears to be an early take off as the a odometer reads 1506 miles. The fuel gauge reads about 1/2 full and this may be the reason it was removed and replaced, however there may be something else not working so buy according. Unfortunately the clear plastic cover has a few scratches and dings from storage that will likely not polish out.
Price is $125 plus USPS shipping, insurance is extra at buyers cost/risk.
Send a Private Message (PM) with any questions or if interested.
-
I believe this to be a 1920's Cadillac Hub Cap wrench. Please review the photos and do your research to insure this is correct for your vehicle. Part number L 5693 with an "M" within a "C" marking in the casting. Big end measures 2-1/2" across and small end is 1-1/2" with two protruding prongs which I believe are used to tighten the wheel bearings.
Price is $50 plus USPS shipping costs, insurance is available if desired.
Please let me know if you have any questions.
Send a PM (Private Message) if interested. Thank you.
-
3 hours ago, jwa said:
still available?
Yes, still have it. Send a PM if interested.
-
If you go to the eBay listing and click on the "(12)" bids, it brings up the bid history and shows that a bid of $63,000 and another of $63,100 (different bidder) were retracted.
-
Auction estimate is $15 to $25 K. Seems cheap.
-
Now that's better, glad to see you're not upside down on the Studebaker yet.
-
Sorry, I can't help with that, but perhaps someone reading this will chime in.
-
Not sure if this is anything you might be interested in but I have an older set of NAPA brake linings for 1938-1942 Commanders.
These would likely be from the 1950/60's. Does not include the rivets, which should be available from various vendors.
These have been sold and are no longer available.
-
I picked these up at an auction many years ago and they have been taking up space ever since. This is a batch of NOS and NORS Studebaker piston rings, some are still in the boxes and some have escaped their boxes. Most have varying amounts of surface rust, some may not be useable. Some have plain edges and some have stepped edges. There appear to be about three different diameters. Here are a few of the parts numbers found on the packaging:
123113 (Standard 6 ?)
123109
121150 3/16 x 3-7/8 .015 Oil
Perfect Circle Oil Ring 3-3/8 x 3/16 2-1/2 thous OD
44861 3/16 x 3-1/8 .020 Oil
44860 3/16 x 3-1/8 .020 PLN.
The price for the whole lot is $40 plus shipping. Must take them all.
Send a PM if interested.
-
Wow, that is some car. My dad would have loved it.
-
1
-
-
https://www.facebook.com/marketplace/item/731813807664675
Located in Mass. Listed price is $9,250
.
Not mine.....
-
For sale Light Six Remy ignition/lighting switch. This unit is correct for the 1923-1924 Light Six and may fit other years and models.
Both the ignition and lighting handles are unbroken and turn readily.
The switch handles are diecast and are often inoperable or broken due to swelling and cracking, however the ones in this switch are functional which is rare.
Sorry no key (it's marked ST 408).
Sold - Thank you.
-
One set is sold to DB26 (pending payment). Thanks.
-
2 sets of an assortment (NORS) of raven (black phosphate) finish lock washers from the 1920's/30's out of an old garage in northern VT.
Approximately 35 lock washers per set.
$15 per set plus USPS shipping.
PM with any questions or if interested.
-
NOS MOPAR (Chrysler, Plymouth, Dodge & Desoto) Heater, Lighting and Wiper switches circa 1950 - 1954.
Price is $60 for all three, plus USPS shipping.
Send a PM with any questions (additional photos available on request).
-
NOS MOPAR (Chrysler, Plymouth, Dodge & Desoto) Heater, Lighting and Wiper switches circa 1950 - 1954.
Price is $60 for all three, plus USPS shipping.
Send a PM with any questions (additional photos available on request).
-
I have some, NOS $45 plus shipping.
Send a PM if interested.
It should look like this:
-
Two antique solid brass grab handles. These are rugged and would be a nice fit for vintage fire equipment.
They need a good polishing to bring out the brass shine. Marked CW or WC.
$40 for the pair plus USPS shipping.
PM with any questions or if interested.
Thanks,
Dan
.
-
AC - PCV Tester in original metal box. Box is in decent condition as can be seen in the photos below and displays nicely. Probably from the mid-1960's to early 70's.
The kit comes with the original instructions. It appears to be missing the rubber plug (CT-12) for the dip stick tube and a special plug (CT-11) for GMC V-6 and V-12 engines.
Actual working condition is unknown.
Price is $30 plus $15 for USPS Priority Mail in USA.
PM me with any questions.
Dan
-
Not mine: https://nh.craigslist.org/pts/d/claremont-289ci-studebaker-straight-six/7114381290.html
1924 Studebaker Special Six engine. For parts or rebuilding. Comes with extra parts, vacuum fuel pump, running board kick plates, etc.
Asking price is $250. Somebody should jump on it. Map shows it near Claremont, NH.
For Sale NORS Dorman CB-18 Throwout Bearing, replacement for GM part number 150250. Fits:
For Sale 1929 - 1937 NOS Chevrolet Throwout bearing, GM part number 837021. Fits all Chevys with carbon bearing, except 1933 - 1934 Master. No box. Shipping via USPS. $60 plus $10 shipping. PayPal preferred, but will accept USPS money order. Contact me with any questions. Dan
1924 Light Six Touring Engine #1489025
in Studebaker, Erskine & Rockne
Posted
I have a Sotheby's Parke, Bernet auction catalog from June 8, 1974 for the collection of Judge Roy Hofheinz, Houston, TX which includes the above Studebaker 1924 light six touring car. There is one photo and short write up. If anyone wants it for the cost of shipping or can take a couple photos, let me know (PM).