51Ambassador
Members-
Posts
26 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by 51Ambassador
-
I have since removed the box from the car and taken the gear and shaft that goes to the Pitman arm out. The steering shaft is what is frozen up. Going to try heat where I think it may be stuck. If not I'll be searching for another box. Thanks for everyone's help.
-
Thanks, these cars are new to me and I never thought a 31 would even fit on the 30. I have a source if this one doesn't work out.
-
I have it on dollies now and where I want to park it. The cross shaft seems froze in the box. I will take the pitman arm off this week. I have no idea how these come apart if anyone has done this before please let me know.
-
They didn't have steering locks in 1930
-
1930 Chevrolet Coupe has been sitting for years. I tried to move it to my shop and found out the steering is locked up. I'm guessing the gear box is froze up so any suggestions so I can get it moved inside would be appreciated.
-
Update, turned the bezel where the end of the spring is between tabs and tapped with a rubber hammer slightly. The guy at Shoebox Central says that's how it's done. I guess this car is stubborn because nothing works. I just found out replacements are on back order.
-
I have the switch in now but still trying to get the bezel on. Anyone? The paint is a 10 so No scratches allowed to get it back on the switch.
-
The ignition switch fell out of the dash and I can't figure out how the bezel goes on to hold it in the dash. I tried to push it in and get the bezel on but it doesn't stay? Car is a 49 Ford sedan
-
I found one! Thanks everyone for the help
-
The other hinge has 15335 it is 1 3/4 wide or maybe just a 32nd less than 3/4 pretty close tho
-
Mine is a hair less than 1 3/4 wide. That looks like the right one if it's a pass side middle
-
Anyone?
-
Wanted complete frontend sheet metal and a rear seat.
51Ambassador replied to 51Ambassador's topic in Desoto
Thanks again -
Wanted complete frontend sheet metal and a rear seat.
51Ambassador replied to 51Ambassador's topic in Desoto
Arizona but can get anything shipped here. -
Wanted complete frontend sheet metal and a rear seat.
51Ambassador replied to 51Ambassador's topic in Desoto
Let me know if they are interested in selling it. I need a rear seat as well. -
Wanted complete frontend sheet metal and a rear seat.
51Ambassador replied to 51Ambassador's topic in Desoto
The car has a Dodge frontend on it. I don't like how the tire is close to the front wheel opening because the Desoto has a longer wheelbase. That is the reason I am looking for a Desoto frontend. I already have the Desoto bumpers, thanks -
Looking for a complete 47 Desoto front sheet metal, hood, fenders, etc also need a rear seat for a 2dr sedan or coupe. If you don't have one maybe you know of a salvage yard?
-
I worked at a Happy Chef as a senior in high school. I still have a menu from there. It was located in the Independence , Missouri area.
-
Thinking no matter what I do the odds aren't great. They made hundreds of thousands of these cars so someone has parts.
-
Here is the left side, I need the right jut assuming the measurements would be the same just the pin reversed
-
I am at a loss in finding a door hinge for my wife's 30 Chevy coupe. The car came missing the pass side center door hinge. I have been looking for over a year so any leads would be appreciated. If you can help or know someone who has these parts let me know. I have already asked Gary Wallace
-
The site won't let me send you an email about the car. Can you message me with a number to call. I live in AZ so you aren't that far away. Thank you
-
Did you sell this car?
-
I'm interested in a few of these if you are selling them. Message me as I can't message you because I am new here. Thank you
-
Looking for a usable 1930 Chevy coupe pass side rear fender and a pass side middle door hinge