Max vormister

GRANT VORMISTER IN AUSTRALIA HAS HAD SILL PLATES RE-MADE THAY ARE VERY GOOD EMAIL HIM grantski002@hotmail.com He also has engine plates

GRANT VORMISTER IN AUSTRALIA HAS HAD SILL PLATES RE-MADE THAY ARE VERY GOOD EMAIL HIM grantski002@hotmail.com

Hi Roger I have just returned home. Sorry for not returning your email but I deleted it by mistake You asked if I was able to buy any Reo sill plates. The answer is no but I am still looking Kind regards Max from Australia

Thank you for the photos but the REO is very different

Can you send me a photo of a compression release valve maxv1@optusnet.com.au

REO 1905-1910 part wanted The part on the motor to lower the compression when stating the car. Or details so I can make one and photos maxv1@optusnet.com.au

1905-1910 REO GAS PEDAL

wanted engine plate or details where I can obtain one

It is from a 1 or 2 cylinder 1905/6/7 REO

I NEED THE LENGTH AND HEIGHT OF THIS BADGE

Thank you for jerrys contact details but he would have to make them @ just under $400 US. by the time I would get them in Australia. I have noticed on some of the cars on the internet have them so some one must be re making them.

Doorsills, LLC – Donald P. Kuehn does not make the early reo sills

I must have tried the wrong sill supplier in NJ Do you mean Doorsills, LLC – Donald P. Kuehn

Doorsills in NJ they appear to be Permanently closed

Reo 1905-08 two sill plates wanted

Hi Waled Did you get the information you needed as I also need the same details. If you received the answer to your questions can you please email them to me. I live in Australia kind regards Max Vormister maxv1@optusnet.com.au

REO 1905 to 1908 model B. I need the points and housing that fit around the cam shaft that drives the coil.  A photos or drawings, information would be a great help as I might have to make it. Any information on the car would be helpful. I live in Australia Max Vormister maxv1@optusnet.com.au

REO 1905 to 1908 model B I need the points and housing that fit around the cam shaft that drives the coil. A photos or drawings, information would be a great help as I might have to make it. Any information on the car would be helpful. I live in Australia Max Vormister maxv1@optusnet.com.au