Skip26WPC

Thanks all, I am all set with valve keepers.

Thanks!

Hi all, nearing completion of '32 CI6 roadster resto. Still in need of rear bumper mounting brackets for full width rear bumper. (Car has side mounted spares) See photos attached of original ones from my other roadster. (Yes, I am lucky to have 2 of the 474 produced!). Thanks for looking!

Hello, getting ready to assemble my rebuilt '32 CI6 engine. I am missing 4 valve spring keepers , which seem to be unique to this engine (maybe '31 is the same?) Parts suppliers have grooved ones for '33-59, which are different. Pics attached for what I need. Any help appreciated. Thanks!

Hi, is there someplace to find torque specs for head, mains and rods for ‘32 CI6 engine. Getting ready to assemble total rebuild Also, looking for valve spring keepers. We recovered 18 of the 24 needed. I’ll post a picture later. Thanks!!

‘32 Chrysler (CL,CH, maybe others?)older Steele reproduction gearshift floor plate. Rubber is still soft and pliable, no cracks. Should clean up perfectly. $100 plus shipping. Steele currently getting $245.

Looking for Klaxon 14 horn for Chrysler CI6 resto. Same as one in pics. Thanks for looking!

Gentlemen, Thanks for the replies and info., always appreciated on this forum. I have 2 CI6 roadsters, 1 very original and 1 I am restoring (very helpful to have both!). As Gunsmoke stated, the standard horn was a Klaxon mounted on top of the engine. My original has that horn. (see pic). The other car came to me with restoration started, only with the trumpets, which are probably not correct. However, dual Delco trumpets I believe were available as optional equipment (see pic.). For now, I mounted the trumpets and not even sure if I like them or prefer the clean look without. Easy enough to remove, I'll decide before Hershey this year. Thanks again for any feedback.

Pic of other bracket

Hi, Currently restoring’32 CI6 roadster. Trying to determine which mounting arrangement is correct for trumpet horns. The car came to me with a pair that mount with the big nut that holds headlight. I have headlight brackets with and without that extra boss area with 2 bolt holes that take a different horn with bracket ( see pics). Is either set up OK for showing the car? Thanks ahead!

Thanks for the feedback,information was helpful. Found one on eBay (EPay??). Installed today, works great.

In need of drive spring for Bendix on ,'28 Q Plymouth. Starter is Delco-Remi714J. Spring is part #809518. If someone has one or can point me in right direction,much appreciated. Thanks!

NORS connecting rods for ‘29-31 Chevy. Qty 6. Rebabbited. see pics. $75 plus shipping.

Parts are no longer available.

Working on restoration of ‘32 CI6 roadster, am in need of some small items (see pics) 1) Dovetail for door 2) Small metal bracket that bolts with shifter on top of transmission. It has a leather dust flap attached to it. 3) Rear fender bolts with correct head markings. 5/16”x18 thread, 1”-1 1/2” long works. I need 20 or so. 4) metal firewall insulation plugs/fasteners (12) Thanks!

Have to clean out parents estate. Dad bought, sold, restored many Packard, Chrysler and others through 70’s-90’s. All the “good” stuff is gone, pics are what’s left of parts. I believe mostly Packard. I hope someone can take it all, I don’t want to scrap. FREE if you take it all. I will add more pics as allowed. Location is CT. Thx, Skip PM or email( skipperkins618 @gmail.com)

Best home for it!

Item is sold!

1937 limited 1st edition of “Life of an American Workman” by Walter Chrysler. The run was 500 numbered copies, this is #61. Signed by Chrysler. Very good condition with minor wear on the spine. $800. I’ll have it in Hershey GCF13-19, green field. Thx, Skip

Hi, I know this is an old post. I am now looking for the same. Cam bearings for 1932 Chrysler CI6. Does anyone know of a supplier. No luck so far with EGGE,Bernbaum or Kanter. Thanks in advance!