demon452
-
Posts
227 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Gallery
Events
Posts posted by demon452
-
-
Sry. I did say I had the other part. Was clueless as to where it went. It's all back together. Thanks for the pics.
- 1
- 1
-
-
Ok. I have the 1 half your finger is pointing to. Apparently I am missing the piece that connects the molding.
Does anyone have that piece for sale? If not I may just try and make 1.
Thanks for the info
-
So I was installing my Lower molding and it seems like I am possibly missing a clip. I have the clips that are attached about the wiper. But was wondering if there is a center clip I am missing? Or is my molding just warped or bent, possibly bent brackets above the wiper shafts? I attached a pic. There is a hole but I dont know it that was added by someone else for some reason.Yes I do have the small center piece for the molding itself. Any help or if I am missing the piece a pic is greatly appreciated.
Thanks, Steve
-
I am wondering if anyone has a different steering wheel and if so what adapter are you using and a part # you have 1. I have a 55 buick century and being tall I want a slightly smaller wheel. I already bought a gm adapter and it's to small shaft/splines.
Thanks in advance
-
18 hours ago, wmsue said:
How can you have a " a nearly one owner '31 Chevy Deluxe"
Is that the same as an 'almost two owner'?
Nice looking collection.
Bill
Lmao. Now that is funny.
-
-
-
I am not against it but the cost may be a bit high for me. Compared to doing a swap. I can't recall what gear vendors was selling them for last time I check. But remember it was quite costly.
-
9 hours ago, Bhigdog said:
Why?..............Bob
Why as in doing it? To add an overdrive transmission.
-
Plan on doing an open drive conversion. Will a 61/62 3rd member bolt Into a 55 housing? I know they will work with a 56. I understand if it works I would have to get new axles due to the splines.
Thanks in advance
-
Perfect. Easy enough. Mine are cracked right before the come out of the column. Just didn't know how the switch itself was. Haven't taken apart yet. Thanks for the info.
Steve
-
Does anyone reproduce a 1955 buick century turn signal switch? Or are they easy to rewire? I am rewiring my car and notice that they are pretty damn dry. Thanks in advance
Steve
-
Just found an old post and figured it out.
- 1
-
-
Anyone have 1 for sale?
-
I have the L bracket. Just looking for the piece on the hood. Also want to know what its actually for?
Thanks
-
-
There was no connector. Solid wire. When I pulled my deck lid I disconnected the wire from the socket and pulled it that way.
-
I ask mainly because steel rubber wants $240 and metro is $130 for the same set of seals. Just seems like a big difference in price to me. I have used both in the past and didn't have issues. Just odd the price difference.
-
Just wondering if anyone has used "metro rubber" seals for the vent window and if so how did they fit? I have used steele rubber products and have had no problems with any of there seals. Just curious on metro rubber seals.
Thanks in advance, Steve
-
-
Looking for a set of rear bumper guards for my 55. Not interested in any that are dented. If they need rechromed that is fine. Please PM me with pics, condition and what your asking price.
Thanks, Steve
-
1956 buick steering column bracket
in Buick - Buy/Sell
Posted
Looking for the bracket that holds the column to the dash for a 56 special. Please send me a message with a pic and price.
Thanks in advance Steve