32desoto

I just acquired a low mileage '29 Nash that is missing the door latch on the driver door entirely. This is the part that slips into the edge of the door and is held in place by two screws. The outer handle shaft goes into it. Please call or text Lonnie at (360)921-9935 or email me a mossback44@gmail.com if you have one or know where I can find one. Thanks.

I need a driver's door garnish molding. I would be happy with either an original or a fiberglass reproduction. It's the last critical part I need to finish this car. Thanks.

Do you have garnish moldings for a 32 Plymouth PB coupe? You can call or text me at 360-921-9935 or email me at mossback44@gmail.com.

I'm looking for the red "Essex Terraplane 8" emblem for the Griffin radiator ornament on a 1933 Essex Terraplane 8. I would also be interested in the Griffin if you have that. See picture below. Thanks.

I've had some success in my search for parts. I found garnish moldings for the passenger door and rear window, but still need one for the driver door and also need the inner garnish moldings for the windshield posts. I found a Plymouth badge or shield for the grille shell and can check that off my list. I'm now looking for the male and female dovetails for the front of the doors. These are the pieces that keep the front of the door at the correct height. I know these are the same as those on my '32 desoto, but can someone tell me which other cars and years will interchange? Thanks.

I need the following parts: 1. Garnish moldings for both door windows and the rear window 2. Windshield side moldings that fit under the swing-out lock mechanism 3. Driver side outside door handle 4. Emblem on grille shell below mermaid ornament Post a response here or call or text Lonnie at (360)921-9935. Thanks.

I bought it from a guy in Toledo, WA, a couple of years ago, but it could be the same one.

Hi from SW Washington State. Here's my 1928 4-passenger coupe. It's a driver and looks pretty good from 20 feet, but the rocker panels are rusted through. Hope to get them replaced sometime soon, but I have a couple other projects ahead of this one.

I'm looking for decent fenders for my '35 Hupmobile Aerodynamic 518D. Please let me know if you have any or know of a source. The picture is a not mine, but is the same model. Thanks.