wangwilko
-
Posts
199 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by wangwilko
-
-
I can still see it: This is title, where do i get number from
1933 1934 1935 1936 1937 1938 CHRYSLER DE SOTO PLYMOUTH 1939 MOPAR LUG BOLT 5
-
There are 5 lug bolts on Ebay now for about $3.75.
Search under 1936 Desoto.
Peter
-
Thanks, will have to catch up with the guy who has them in the shed and get a photo of back.
-
They are located in Auz.
-
-
On my Desoto it goes into brass fixture this fixture is bolted to cylinder and there is a copper washer used. I will try and post photo's in next couple of days. Peter
-
Hi Jay, I will try and get photo of one i have. With the Desoto the matting was glued to a metal back with these clips sticking out.
This metal was placed over running board and clip ends twisted to hold in place.
Thanks, Peter
-
Do you have running board clips.
-
Try contacting R.Dan Herrera.
In another forum he talks about a 1936 Dodge.
"I currently have 2 of these cars and know of many resources for parts that I have had to obtain for them. Feel free to contact me if the need arises."
- 1
-
That is correct Eric the ends slide in and out. My Desoto was different (one wire), I had them made. Peter
-
Hi Ron, are they like this. They are about 5 1/4". Peter
-
Yes.
Peter Wilkinson c/o Midwest Imports
1201 South Macedonia Avenue
Muncie Indiana 47302
-
Steve, I am in Australia, do you still have any left. Peter
-
I am trying to contact Diran as i have paid for some moulds from him in 2021 but i think my emails from Australia are going to his junk mail.
Joe Tonietto was originally forwarding my emails to him but that may have stopped.
I just need my emails to go through to him or a contact phone number to follow up on where they are or what needs to happen.
Thanks, Peter
-
Hi Ron, Do you have a photo. I have a 1936 Desoto Airstream and i had a number of these springs made for my restoration.
Peter
-
There looks to be one on Ebay if you use that.
-
Looks good, would JB weld be able to removed to assist in postage in a tube.
What would be purchase price be?
-
I think they are the back door and rear panel one with the curve down. I will try and post a better picture.
-
I have some trim which may be needed by someone.
I first need identification, if someone knows what they may be off that would be appreciated.
I think this one is off rear of Chrysler or Airflow and in good condition.
I can get measurement etc if required, but main thing is to identify what they are off and if someone is interested.
Thanks, Peter
-
-
Could you post photo's please and a rough cost.
-
Thanks John, i am going to the plating guy on Monday and think that is best solution.
Were the rivets brass or copper that held it in place. Peter
-
Thanks, hchris do you have a photo?
-
Can anyone post a photo of what finish it should be or let me know details about this long hinge.
When the bonnet / hood (from Australia) is closed the centre strip "C" part looks to be chromed.
Under the bonnet the flap parts of the hinge that rivet to bonnet metalwork should that be chromed or painted the same color as the under bonnet color?
I am guessing all chromed.
Thanks Peter.
LUG BOLT
in Chrysler Products - General
Posted
Found it.
eBay item number:156130649076