[W.T.B. running board chrome strip for 1941 Plymouth P12]

I would have thought a good panel beater could fix this, then re-chrome.

[LUG BOLT]

Found it.

eBay item number:156130649076

[LUG BOLT]

I can still see it: This is title, where do i get number from

1933 1934 1935 1936 1937 1938 CHRYSLER DE SOTO PLYMOUTH 1939 MOPAR LUG BOLT 5

[LUG BOLT]

There are 5 lug bolts on Ebay now for about $3.75.

Search under 1936 Desoto.

Peter

[Skirt / Spats what would these be off.]

Thanks, will have to catch up with the guy who has them in the shed and get a photo of back.

[Skirt / Spats what would these be off.]

 

They are located in Auz.

[Plymouth wheel cylinders]

These are the photo's for my Desoto.

There were just copper flat washers, not sure if they should be crush washers.

 

[Plymouth wheel cylinders]

On my Desoto it goes into brass fixture this fixture is bolted to cylinder and there is a copper washer used. I will try and post photo's in next couple of days. Peter

[Very small early Chrysler parts FS]

Hi Jay, I will try and get photo of one i have. With the Desoto the matting was glued to a metal back with these clips sticking out.

This metal was placed over running board and clip ends twisted to hold in place.

Thanks, Peter

[Very small early Chrysler parts FS]

Do you have running board clips.

[WTB 1936 D2 sedan rubber parts]

Try contacting R.Dan Herrera.

 

In another forum he talks about a 1936 Dodge.

 

"I currently have 2 of these cars and know of many resources for parts that I have had to obtain for them. Feel free to contact me if the need arises."

 

[Prewar Brake Shoe Return Springs #677466]

That is correct Eric the ends slide in and out.  My Desoto was different (one wire), I had them made. Peter

[Prewar Brake Shoe Return Springs #677466]

Hi Ron, are they like this. They are about 5 1/4". Peter

 

[1936 Dodge Plymouth]

Yes.

Peter Wilkinson c/o Midwest Imports

1201 South Macedonia Avenue

Muncie Indiana 47302

[1936 Dodge Plymouth]

Steve, I am in Australia, do you still have any left. Peter

[Diran Yazejian]

I am trying to contact Diran as i have paid for some moulds from him in 2021 but i think my emails from Australia are going to his junk mail.

Joe Tonietto was originally forwarding my emails to him but that may have stopped.

I just need my emails to go through to him or a contact phone number to follow up on where they are or what needs to happen.

Thanks, Peter

[Prewar Brake Shoe Return Springs #677466]

Hi Ron, Do you have a photo. I have a 1936 Desoto Airstream and i had a number of these springs made for my restoration.

Peter

[WTB '36 Chrysler Airstream Sedan TRUNK HINGE]

There looks to be one on Ebay if you use that.

[WTB 1936 Desoto Airstream Running Board Chrome Trim Side Strips or Side Trim]

Looks good, would JB weld be able to removed to assist in postage in a tube.

What would be purchase price be?

[Side Trim Identification]

I think they are the back door and rear panel one with the curve down. I will try and post a better picture.

[Side Trim Identification]

I have some trim which may be needed by someone.

I first need identification, if someone knows what they may be off that would be appreciated.

I think this one is off rear of Chrysler or Airflow and in good condition.

I can get measurement etc if required, but main thing is to identify what they are off and if someone is interested.

Thanks, Peter

[WTB 1936 Desoto Airstream Running Board Chrome Trim Side Strips or Side Trim]

Thanks

[WTB 1936 Desoto Airstream Running Board Chrome Trim Side Strips or Side Trim]

Could you post photo's please and a rough cost.

[1936 Desoto Airstream Hood Hinge]

Thanks John, i am going to the plating guy on Monday and think that is best solution.

Were the rivets brass or copper that held it in place. Peter

[1936 Desoto Airstream Hood Hinge]

Thanks, hchris do you have a photo?