sebastienbuick

here for the last weekend I will have to do for the rest of the beam, to buy the same type of sheath but the diameter below for the rest (headlights part), change the battery cables, take care of this box has sandblasted, change several pods , especially those of the headlights, can be changed the relay of the headlights (but if it works, why change it), give a boost to my charge controller, and I think it will be good after . here is

Then I could continue to put my beam in my sheath, some may not like the aesthetic side of this sheath, but it is especially the practical side and protection of this sheath that made me choose this model

But I realized that the copper of the wire was in bad condition at this place (because it was stripped at this place and oxidized thereafter), so I replaced a small part of this cable to fall on good copper With installation of thermowell at the weld site

My electrical harness already has a lot better compared to what it was before. Then I test the continuity to the multimeter of each wire and all my wires are good, no wires to cut Next, I buy a wiring harness model When I started to put my beam in the sheath, I realized that there was a wire to damage So I cut it and strip

Hello everyone, some news from last weekend of the Buick. While waiting for the distribution kit and various parts, I continue by the harness of the engine compartment (engine, headlights, ...) Once spread on the ground, I noticed that just this harness, measure the curves of the cables, ..., was the length of the car ^^ To start, clean all exposed cables (except the battery cables I'm going to change) in this picture, I will of course remove the cables of this case to clean the cables, the plastic case and sandblasted the metal parts)

I do not know why they put 21% volunteer, it may be the walk they take because there is no minimum price to ask. thank you for the links of sales of cars , they are very beautiful these 1969 riviera , we also see the front of a 1969 Eldorado On the other hand no picture of the advertisements is displayed: /, is this the same for you? thank you !

Yes it is true :/ , if someone is not very far from France in January, I go to auction in January 20, if someone wants to come too

hello, ok thank you very much for the information . I will send them a message to see. thank you

We must not forget that we are in France and that it is much more rare to find these cars than in America. This corvette pleases me a lot and if it sells not too expensive, I would like to buy it are you going to see the video ? the former owner loved his cars a lot and he did not want her to go to the garbage dump, so he bought these cars to keep them longer to extend their life I really like this Continental 1956 we can see at 2min48 , a "nose" of Ferrari 250 GTO own on cars

thank you Yes I would like to walk all day in the middle of all these cars . If all goes well I will go to auction in 20 January which will take place in "Tarbes" in the south of France . Indeed we can thank this people who keep all these cars , because it would have been junkyard years ago.

i do not know ^^ in any case he had a nice collection

this Stutz is very beautiful the friend who told me this, know the owner well. He told me that the former owner was so passionate about American (and European, ...) cars that he bought a lot of cars for the pleasure of having them. He regularly buy cars and keep them at home, it was his collection of cars. I would love to have this corvette, but in my opinion there are many people who are interested and the price will quickly go up

on the video we see mostly cars in the forest and in the garden. we do not see the 80 cars in the garage, many are just dusty, and a lot of cars can be restored American cars are very interesting to me, even if there are missing pieces on them. We rarely see in France a contiental 1956 or a bel air 53, toronado 69, ... Here in France, there are many people who are interreser by these cars

it's true, you're right Once the motor is put back in place, with the shadow, and the elements on the turn, we see less the difference. I will see this in the week

Indeed there is work for some cars, but they are in good condition . There are cars in the forest that will have less chance of being restored

hello everyone, a friend had an acquaintance who has just died. This person had a big stock of cars at his home, there are two garages full of cars and there is also plenty of cars in the forest there is next. For the moment there is only one garage that has been opened and there are 80 cars in these garages. the second garage has not yet been opened. This happens in the south of France in the "Tarn". the cars will all be for sale on 20 January 2019 in France. there are a lot of american cars because this person was an American car enthusiast. there is a corvette C3, lincoln continental 1956, 5 eldorado 1969, lincoln mark IV, ... there are also in bad condition here is a short video where we can see some cars

Thank you very much zipdang !

Thank you very much for having taken the time to answer me So I'll have to buy Duplicolors paint or paint from Eastwood to get the right shade It seems to me that there is OEM delivery in France, I will look for it. thank you so much ! have a nice week end !

Thank you for your answers I am trying to restore my buick to the nearest of origin, I would like it to be like when it came out of the factory at the time And that's why I'd like to paint my engine with the color that comes closest to the origin Indeed the "RAL" hue is a universal color chart, that's why I'm looking for that. I saw that the red hue "RAL 3020" this brings a little closer to the original hue too. thank you

Thank you

okay thank you so much ! thanks for the internet links Is this the original shade for my engine? Do you know if they can deliver the paint for France? what is the reference of this color? thank you so much !

Hello, thank you for your answers I had already painted my engine with a red aerosol paint but now I would like to paint it with the original shade with a single-component or two-component paint that is applied with a spray gun. thanks for the internet links

I continue work this weekend

Then, apply the silver paste (Zebracier) on the exhaust manifold heat shield and on the small exhaust manifold part.