Lahti35
-
Posts
1,137 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Gallery
Events
Posts posted by Lahti35
-
-
13 hours ago, neil morse said:
Looks pretty nice. Video won't play, so I can't offer an opinion on the coffee grinder!
What a shame that's the best part! In all seriousness though I bet it's the air filter not tightened down...
-
Nice looking Dodge but overpriced...
Marketplace - 1949 Dodge d24 | Facebook
Listing for my dad a 1949 Dodge D24 fluid drive flathead 6 runs and drives located in Garden City Michigan
I can't tell if the engine has an exhaust leak, the air filter lid is loose, or it's grinding coffee - watch the video and you be the judge!
-
1
-
-
What happens in the trunk stays in the trunk baby!
-
1
-
-
On 4/26/2024 at 8:06 PM, Jeff Perkins / Mn said:
Or…I maybe I have he-man arms…... ♀️
Arm circumference is directly proportional to the number of cars you have without power steering!
-
2
-
3
-
-
1911 Buick - Binghamton, NY - $8,900
A very solid car requiring a restoration. Fenders and body seem good. Was painted red in the 20s maybe. Engine is stuck. This would be an fairly easy restoration and end up a very good 30 hp car for touring.
Looks to be in a stash of other cars, someone's horde coming to light?
-
9
-
-
This is the amphibious version of the GAZ69 light utility vehicle. Much like the US jeep the USSR also made an amphibious version of their "jeep".
I think it's grossly overpriced, most of these Russian vehicles are when they make it to the states. My old GAZ69 I restored years ago is currently for sale at $16K in NY on facebook marketplace if anyone wants a more affordable option (and even that seems high).
The GAZ69 and it's amphibious cousin for sale here are tough little overbuild vehicles. Parts are much more available than they were 20 years ago when I did mine with more ex eastern block countries now having internet. The trick is to get one that's not all worn out to start with, they tend to be run into the ground.
-
1
-
1
-
-
I like these 4 door sedans the older I get, must be something in the water...
Looking for some comps I found a nice 2 door that sold for $8k a few years ago. I can't imagine the market has changed much in 2 years for a car that wasn't super hot then.
I think this car is a nice example of a vintage car in great shape NOT being worth lots of $$$.
I'd go 6-7k myself and cruise the rubber off it.
-
On 4/21/2024 at 6:51 AM, Jeff Perkins / Mn said:
I was shopping for an improved Ford Touring (1926-27) last fall. I had a choice of several nice ones under 10K, all within 250 miles of my home. There are many out there, this one is priced way at the upper end.
It's always interesting how location comes into play. Folks within 300 miles of my domicile in Michigan put them up for sale around 15k for the most part. Nearly all are middle of the road examples that should be sub $10k cars at most. Moving down to the local $10k asking price and you get cars that don't run or are poorly restored. Everything seems to be priced 2X around here and they just sit for sale week after week. I wouldn't mind another T to drive around while I finish my '26 but not at the $$$ fishing expeditions I see posted on the marketplace. I do see the occasional exception of a decent fairly priced T but at an ever decreasing rate.
-
1
-
-
8 minutes ago, theconvertibleguy said:
Gotta say, that is original. Is it a very old sewage truck?
From what I could find it's an industrial size sewer snake. This one appears to have maybe lost its's flexible snake that would have been spooled around the drum. There looks to be something dark wrapped around near the front of the spool but it's hard to see if it's there or not.
Here is a pic from a trailer unit made by the same company that shows the "rooter" spooled on...
-
I've had this on my watch list for some time just to see what happens... Alas, no one has stepped forward to rehome this little stinker as of yet!
Marketplace - 1955 Chevrolet 3800 | Facebook
1955 Chevy 3800 Runs and drives Extremely clean Seweroder on back.
-
2
-
1
-
-
On 4/12/2024 at 4:43 PM, TerryB said:
The famous “it’s been in storage and it won’t take much to get it running” line has been used. If it won’t take much then do it please.
He just "doesn't have the time" or has "too many projects"!
-
I've been following this car for some time, years in fact. It has been for sale numerous times by the seller and once through a broker. There's even a thread on it over on The HAMB detailing it's resurrection after a storage spell. Supposedly the engine was rebuilt but never sounds like it was dialed in or done right... hard to say. It would be fun to bum around in but space and time have always eluded me when it comes up for sale again...
-
3
-
-
My stainless hardware kit showed up so I set to work polishing and assembling the mirrors... I also got new rubber gaskets as the old ones were dried out and nasty. Here's an in process shot showing the polished assembles unit vs. the un polished parts pile. I found that scrubbing the stainless bits with steel wool and thinner removed the gunk and rust stains but did not leave scratch marks. Polishing with simichrome brightened them up.
Took me a few hours but I got both sides polished and assembled.
The lower mounting points on the door were kind of a mess. Some of the rivnuts had pulled out and others were missing or had stuck fasteners in them. Once all the old hardware was removed I made a tool with a ground down carriage bolt, washers and wingnut to flatten the old rivnut holes. I had to remove the inner door panel to get access but it worked well and flattened the holes back down.
I used cross nuts for the new lower mirror mounting point as they have a wider footprint, new rivnuts would not have worked well in the messed up holes. They sell a tool to install them but for $3 I made my own and set them with no issues.
Got them installed late in the day but it was nice to see them in place. I have some adjusting to do but they're on! Always feels good to get stuff that's been kicking around the workbench for a month off the workspace.
-
6
-
-
I would not use a cam bearing twice. You have to pull the cam anyway to drill a hole in the bearing so it would seem like a good time to look and see if the holes are lined up.
So you're getting no oil out of the rearmost driver's side head hole where the special bolt goes? Do you have a bolt installed there?
-
I'm just hoping for a dryer year than last... Man it rained and rained and rained last year, the grass grew like it was hopped up on fertilizer. I was mowing every 4-5 days and by the time summer was ending I was sick of it!
I moved up to a zero-turn a few years ago and cut the mow time down from 3 hours to 1 but it still eats up garage time at an alarming rate, lol!
-
1
-
-
Earlier this week I filled the power steering pump with ATF as per the manual. I tried rotating the pump by hand to move the fluid through to the steering box but it didn't really do anything. I was a little concerned that I had rebuilt the pump wrong but I ended up just letting it sit until Saturday due to other obligations. When I checked the level yesterday it had gone down without any help from me so I added more and prepped the engine for the first start in a few months. The carb had gone dry but with some cranking it refilled and two pumps on the gas it started up. I ran it for 20 seconds then shut it down to check on the power steering fluid level, which had dropped so the pump was working.
I spent some time bleeding the power steering system... Running the engine, topping of the fluid in the pump, turning the wheels back and forth with the front end off the ground, etc... Other than a small leak at the pressure line on the steering box it's performing as it should, smooth operation and no weird noises. I ordered a crowfoot wrench to tighten the fitting on the pressure line, it's tight in there and a regular wrench doesn't work well.
I'd like to go for a real drive but I want to get the side mirrors on first, the rearview is hazed from age and I need to see who's coming up behind me while I make some trial runs. The truck came with large side mirrors that stick out pretty far, too far to get into my garage in fact. Last fall I picked up a set of the smaller folding mirrors that hug the door more.
I lucked out and found these locally, while they are complete the hardware is all rusted solid or broken. The brackets are stainless but the hardware is not. There is a guy who makes a stainless hardware kit for these and I've been waiting on delivery but it's taking a long while... I got tired of waiting tonight and decided to pull all the rusted hardware off and get the stainless parts ready for cleaning.
This is some ugly stuff...
I stuck a wrench in a vise and used it as a third hand to hold one side of the hardware, my hands were busy stabilizing the mirror and operating the other wrench doing the turning.
The posts on each end of the mirrors were especially tenacious and had to be drilled out...
My 1.5 hours of careful effort with a drill, dremel, and torque yielded a pile of sheared off studs 'n junk. All the stainless mirror bits are ready for cleaning.
-
8
-
-
Looks sharp!
-
I had a guy give me a set of straps like that once, 1/2 the width of BlueDevils, while lifting a 1600lb milling machine onto my trailer. Told me to keep them for unloading. I've since used them with my hoist to life engines, transmissions, etc, more often than I can remember. Handy they are!
-
Make sure you tow it out of there faster than the mice can follow... Judging by the cab floor it's a critter condo!
Cool truck, be fun to put back to work around a hobby farm.
-
2
-
-
There may be a clogged drain on the rear main bearing or bearing clearances could be worn to excess resulting in oil flow overwhelming the oil return... That's if there is only an oil slinger and no seal. Have you had the oil pan off?
-
1
-
-
It it makes you feel any better my '68 F250 transmission pan i put on last fall is leaking... I did my due diligence and cleaned the mating surfaces, used the right gasket and didn't overtorque. Sometimes they just give you the one finger salute!
-
22 hours ago, Fossil said:
I can't see them from the drivers seat so they would probably stay on. At least they are black walls
They bug me too, I'd wear them out though before I switched to authentic donuts with the price of rubber these days.
-
1
-
-
I got the Bendix box installed this afternoon after I took the wife out for a steak dinner and got fat. I think I burned off 1/20 of the meal working on the truck but it's the thought that counts.
The install went pretty smooth although my idea to install on bolt at the bottom and pivot the box splined shaft into the column coupling was a flop. Not enough clearance so I had to pull the steering column backwards, install the Bendix, and then push the column back down into the splines while keeping the steering wheel level. It's worse than it sounds, i'm getting pretty good at it after doing it a few times now.
I was real careful not to disturb the splined input shaft and knock it off center. The marks still lined up and the wheel is centered in the cab so hopefully it stays that way driving straight. The pitman arm can only go on one way so no worries there. I'm waiting on a new pitman arm nut and washer, took me a bit to find the right one but I found the Bendix box and Ford unit use the same fasteners (but different pitman arms).
I can tell the difference already turning the wheel in the cab, it's smoooooooth... Before it was rebuilt it was kinda jerky. I picked up some gen-U-ine Motorcraft Type F fluid to fill it with as directed in the manual. I'll wait for a nice day to jack up the front and bleed the system, it's been cold here and will be for a few days yet.
-
4
-
-
Anything new on the Pontiac? I really enjoy this project and have read through it a few times now...
-
2
-
1954 Ford Skyliner - $8,000
in "Not Mine" Automobiles For Sale
Posted
I can feel myself cooking in my own juices under that canopy on a sunny day... I always though these were cool.