Chasander
-
Posts
372 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Chasander
-
-
I would guess not. All Divisions had independent Engineering.
-
I was able to cut mine with a dremel cut off wheel
-
1
-
-
Since adding the trans leak, I have put about 100mi on car. Drivability has improved. I did add the other 1/2 of trans sealer. Drove it yesterday. about 8 mi. I can now take off with more acceleration without it running away. Did not have to take off in low at anytime. Things are not perfect yet but improving.
-
Has the July-August Review been mailed yet?
-
My first ROA meet, I was not allowed into the "New Orleans" room until Friday(Did not pay for Banquet). So was not able to attend ROA meeting Thursday.
-
Yes Internal "Leaks" Apparently Lip Seals can harden and leak by. causing take off problems. My problem seams to get worse with full warm up.
On another post I was told because the car had set for so long to just drive it and it may improve. I agree pressure testing should be done, will have to find someone with hoist and familiar with dynaflow. Any way I added the Bars Leak and will see what happens.
-
No external leaks, problem is only in Drive . Can only take off Gently. After 15 MPH or so acceleration gets better. At 30 MPH Acceleration seems normal. Car As set for many years(Took about 6 qts of fluid). I was advised that Lip seals are probably hard. Inspected pan and was very clean. Anyway I put 1/2 can Bars Leak Trans Concentrate in. Will see what happens.
-
1
-
-
Has anyone had anyone had any luck with transmission additives softening up the seals in there dynaflows?
"Lucas" and "Bars" make transmission leak stoppers.
Chuck
-
Bob
Thanks for looking. I have stuff I can't find to.
Chuck
-
Is there A difference between 63 and 65 GS mufflers. Maybe size?
-
U are right Ed I thought you were referring to the choke tube Pipes
Sorry
-
In line tube home page. Go to brake and fuel, go to Buick full size, go to 63-75 Riviera, 8th item down, part # BVE6301
Chuck
-
Bob Thanks for the offer Are U going to the ROA meet?
I will leave U a PM with address and cell.
-
My tubes are rusted and broke. Have not figured out how to pull the broken pieces out of the manifold well on the car.
In-Lines-tube sells these tubes, listed in there catalog.
Chuck
-
All the ones across the bottom are gone. I think there s 8, Checked Mr. G web site the show clips for 64 windshield maybe they are the same.
-
Is there a source for rear glass molding clip for 63 Riviera
thanks chuck
-
Thanks
I think I like the tube idea. The pic also shows me how to mount spring.
-
Would some one post a pic how jack handle should mount on a 1963 Riviera Please.
Chuck
-
Can I replace the motor mounts laying on my back in my garage? Passenger side mount is flatter then a pancake.
I only have a floor jack available.
Chuck
-
Go to wiringharnes.com and ck web site or call them. I bought that Cable harness for my 66 skylark GS and it maybe the same
-
Noticed you are from Fenton I live near Flushing. Would like to talk to you about Dynaflow.
64 Riviera Engine Options
in Buick Riviera
Posted · Edited by Chasander (see edit history)
ED 65 and 66 Skylark Gran Sports had 401 nailheads