[1929 Chrysler Rear Tire Carrier]

This is spare tire carrier  for a wooden wheel rim and  came off a 1929 Model 75. $200 plus shipping

[Clum Switch for 1929 Chrysler]

Looking for  a NOS to good or a restorable Clum switch for 1929 Chrysler.  My old one has 6 fingers and a tab on the other side with  a slot in it.  The one I have has been messed with and had solder slobbered all over.  Any trace of the part number is gone and appears to have a few broken fingers soldered on very clumsy.  A good restorable unit  that hasn't been messed with would work.

[Clum Switch for 1929 Chrysler]

Thanks to everyone who posted  constructive ideas.  This is too far gone to restore and has been messed with quite a bit..  I will start a new thread in the parts wanted section and post some better pictures.

[Clum Switch for 1929 Chrysler]

59 minutes ago, Tinindian said:

Obviously some people do not know the difference between "Cars Wanted" and "Parts Wanted".

Boo Hoo, All these years I had no idea there was a parts wanted section.  But since you seem to be the enlightened one and the web site police you could move this to the  parts wanted.

[Clum Switch for 1929 Chrysler]

looking for  a NOS to good or a restorable Clum switch for 1929 Chrysler.  My old one has 6 fingers and a tab on the other side with  a slot in it.

[Molded floor mat alternatives]

If you haven't called these guys already it may be worth a call, they may be able to help. They make floor mats also.    http://www.runningboardrubber.com

[WTB 1929 Chrysler 75 Steering Wheel]

This is my steering wheel, the ribs in the area of the grips is what I am after. I believe that all 1929 Model 75 cars had this type of wheel originally.

[WTB 1929 Chrysler 75 Steering Wheel]

Gunsmoke, That is a nice wheel you have there, but wont work for my project. I am doing a high point restoration and need a original with the correct has marks on the grip area. Cheers

[WTB 1929 Chrysler 75 Steering Wheel]

On 8/2/2020 at 1:29 PM, leomara said:

Try Jay Astheimer 610-863-6955  astheime@ptd.net, he has everything for pre 1930 Chryslers

 Jay was the first person I contacted. But no luck there.

[Trying to Contact ligurian]

I have some front and rear 1929 Model 75 bumpers which I believe are the same as 1928 Model 72.  If you want I can look this weekend when I get to my storage.

[WTB 1929 Chrysler 75 Steering Wheel]

Looking for a very nice original  to NOS 1929 Chrysler 75 Steering wheel with all the ribs present.  Not interested in any needing restoration (I have a one) or that have been restored with loss of detail of the ribs.

[WTB 1929 Chrysler 75 Steering Wheel]

Looking for a very nice original  to NOS 1929 Chrysler 75 Steering wheel with all the ribs present.  Not interested in any needing restoration or that have been restored.

[1929 Chrysler Replacementt Ring Gear]

My apologies, I should have specified.  Its a flywheel ring gear.

[1929 Chrysler Replacementt Ring Gear]

Is there a good source for a replacement ring gear for a 1929 Chrysler 75?

[WTB 1929 Chrysler Model 75 Lower Radiator Tube]

Thanks, that worked like a charm!

[gauge face restoration needed]

Do you have the artwork or does it need to be done?

[WTB 1929 Chrysler Model 75 Lower Radiator Tube]

Looking for a nice lower radiator water tube for a 1929  Chrysler Model 75 without any dents or other issues. This is  from the water pump to the radiator connected by two small rubber hoses.

[1929 Model 75 Chrysler Starter and Generator Tag]

Thanks Tom.  That should work.

[1929 Model 75 Chrysler Starter and Generator Tag]

Thanks for everyone's suggestions, I looked at the ones from Classic & Exotics and the others listed, but the tags are a little different with Dayton Oh missing on top. I have seen a reproduction tag that is well made and correct, but just cant remember where.

[1929 Model 75 Chrysler Starter and Generator Tag]

Who makes the correct starter generator tag for a 1929 Model 75. Internet search comes up with later style and early Canadian ones.  Need one that is correct for a high point restoration.  I have seen them before but just cant remember who made them.

[Champion C4 Spark Plugs With Brass Tops]

still looking

[1920s French radiator hose manufacturers]

Looking for names of companies in France that made radiator hoses in the late 1920s for the car manufacturers or offered them as aftermarket replacements. A picture of their logo would be great, but a name will do.

[Champion C4 Spark Plugs With Brass Tops]

Looking for NOS brass  top Champion C-4 spark plugs without any rust on the bases.  These are going on a show car and I need them to be exceptional. I need 12 but will buy two full boxes if anyone has them. Please send me a PM with price and pictures.

[Screen Printing On Remote Brake Reservoir]

Thanks, I asked my gauge guy and he said he could do it,

[Screen Printing On Remote Brake Reservoir]

Terry, Thanks for chiming in.  I want to try and do print before I go the rout of using water decals.  Its going on a high point restoration and with the brake reservoir mounted in plane site  it will be east to see the water decal.