john hanson
-
Posts
309 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by john hanson
-
-
If you look at the 2 mounting holes for the coil they are at 45 % angle if it is like you say i would have to get special coil for it.I have never seen a coil that mounted like that. All my other ford Dist. have mounting holes at 90% To the face of the dist.
John Hanson
-
I Know its Ford. But what doe's it fit and what year. The main thing that different is the mounting holes for the coil. They are at an angel Thanks
John Hanson
-
Brian I think i have the same system in My 38 Buick and was hard and slow starting . that was right after i rebuilt it with new battery . one day i just bought a new battery again. Dont ask me why i just did. Has started every time since like it should. so what i am saying is I think the boys are right. What you have low voltage . I don't know if you can but try and set up another battery and run power off that to coil only and use your regular battery to crank with.
John Hanson
-
I have a transmission complete with clutch only problem is i am in ill. shipping would be costly
John Hanson
-
Better check out that 1936 Buick you may have to get them side by side to tell the diffarence .Then they may be the same glass.
John Hanson
-
TRY ETHER 1936 bUICK OR 1939 cHEVY My bet is chevy
John Hanson
-
I have about all the parts for for the 30s macanical brakes but i don't know if they car or truck. what i need so i can find out is a picture and sizes.
John Hanson
847 340 0727
-
I Have a set of new gears #1393755 Fits all Buicks 1946 to 1955 even some before that 125.00 = shipping About 12.00
John Hanson
-
i tried to send pictures but i can not get theough Give a ph number and time and i will call you. i do have the fender 56 s left rear and it is new.
john
-
I have I think a rear fender and it should be the left rear. i'll see if i can find it tommorow
John Hanson
-
I should have 4 2 bar spiners. I think they are in good shape I will get them out this afternoon and check them out.
John Hanson
-
Ford coil I think from 1932 to 1935
John H
-
Don't get excited yet but i have a fender that when i got some years ago i was told that it was a 22 Buick . don't rember if it left or right I will see if ican get out there tomorrow and get a picture . buy the way it is eather new or vary nice used.. now to find it after 10 years.
John Hanson
-
I checked out my wheels have a set of # 895 15x 6 2" center hole 3" hub If you are still interested its going to be warm here friday i will pull them out and see how good they are and get a picture or . let me know
John Hanson
-
on the trunk
john h
-
try about 48 stud
-
late 40s early 50s studabaker
-
Try this no. 352 584 8913
Stainless Steel And Aluminum Metal Polish | CHROME-IT Super Polish
John Hanson
-
If itisn't to cold out there wed. .i will check it out . They in a trailer I know there are some of them 895s if they fit. w3ill let you know.
John Hanson
-
Thanks Roberta I've was looking for that chart for a while. Now i can idenify my wheels
Now to the person who wanted rally wheels I have about 5 sets All different Years From 1964 up. And some regular ones too.
John Hanson
-
WHAT IS A SET OF THESE
-
How close are they to a Ford head light. if they are about the same i have a set of 1937 to 39 converted to seal beams.
John Hanson
-
I found that 1939 Buick special Hood trim. it is Stright and no dings. will need polishing. if interested i can send pictures.
John Hanson
-
I have a set of 39 trim .I'llcheck tomorrow and see if ican find it and see how good it is.
john Hanson
Ford Distributor
in General Discussion
Posted
Thank you never would have thought of that
John Hanson