john hanson
-
Posts
309 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by john hanson
-
-
Did you polarize that rebuilt generator
john Hanson
-
I have a few headlights seal beam 6 volt with or with out tets 0.00 ea. plus shipping
John Hanson
-
Check 1941 olds
john Hanson
-
Did you get that visor bracket on ebay looked like the one you needed. if not I still have mine and think you are right it may work.
John Hanson
-
I think I have one. If I do it is off a 1965 401. I will check it out today.
John Hanson
-
I just saw a fair picture and the one I have looks like it may be like yours but the wrong side. (sorry)
John
-
I may have a visor mounting bracket. I can not find your good picture of it. If interested let me know and we'll see what we can do for pictures
John hanson
-
I am not sure what you want so we are going to tell what I have. I have the 1963 64 and I believe 65 3 bolt spinners. ( Spinners Only) They are used but I think nice. 60.00 for the set. plus shipping. if interested let know and I can sent picture. John Hanson
-
I found my retainers but they are a different number I have #4579200 & 4579201 Witch I do not find in the book. and I do not find an interchange #. I think most gm cars used this same retainer. John Hanson
-
If you are still looking I'll check tomorrow I think I have a new one. John Hanson
-
leaving town for a few days. When I get back I will find them and let you what I have. If you don't find them I know I have some just have to find them. John Hanson
-
I have some of them. Do you have a part number to make sure. John Hanson
-
You don't have the classic frozen clutch situation. It sounds like your clutch is dragging. Could be bent or maladjusted linkage, throw out/pilot bearing problems, Disc or pressure plate problems. If the linkage/adjustment checks out OK I'm afraid your next option is clutch and throw out/pilot bearing replacement. It's very likely your local NAPA store can get your parts............Bob
I think this may be an adjustment of the linkage. How much free play do you have. You should have no more then 3/4". John Hanson
-
Check it out. The president of the club said we don't need the vendors so he cut them off in early June. and used the spots for show cars. he said only about 1% go for parts. I think hes wrong on all counts John Hanson
-
When you are looking for these fittings put in Bijur Fitting John Hanson
-
I believe I have a new lower front bumper for a 1953 Buick 400.00 Plus shipping. John Hanson
-
I Have a few paint chip book that I have been look for some one to buy .I know they are older but I don't remember how old .I'll check tomorrow and see. John Hanson
-
What i have is OEM Still in the gm box. but i have ben wrong before. You can never be positive.
John Hanson
-
I have 2 diferent moldings one i believe is for a 1940 buick 71 or 76 model 1 1/16" wide 77 1/2' long It Does make a diference witch side. they both are the same size. and nos
John Hanson
847 340 0727
-
If all else fails I have a roll of woodgrain 2' x 25' it is like 1968 to 72 olds color . Quite light. Part GM # 231231 125.00 plus shipping.
John hanson
-
Turn the lock to acc or left all the way take paper clip or likes put it in small hole push in a little and turn key a little more to the left. then ti should pull out easy.
works ever time for me.
john Hanson
-
what do you need i may hace a piece or 2
John Hanson
-
I guess I have a muffler too. I'll check this out. send me an email address and I'll send Phone no.
John Hanson
-
I Have every thing else except Muffler NOS May have some hangers too
John Hanson
Wiper cables
in Technical
Posted
I have new parts and cables. It would be an assembly. If interested let me know. I will check it out.
John Hanson