WANTED - 1910 IHC Model F Roadster - Brass Troy Windshield Parting Strips - Channels

[E_Johnson]

WANTED for 1910-11 IHC Model F Roadster: the two brass parting strips (channels) that separate the upper and lower panes on a brass Troy windshield.

 

See photo below - the red arrows are pointing at the parting strips. 

 

The parting strips are 39.5" long. The outer measurement of the channel is 5/16". The inner measurement of the channel is 1/4" x 1/4". Refer to drawing below. 

 

I mainly need just the parting strips but if you have a partial or complete brass Troy windshield, I would also be interested in purchasing. 

 

If you have parting strips from another brand of windshield such as Rands, Victor, Standard, Metzger, etc. that I may be able to adapt to my situation, I may also be interested in them. 

 

Or, if you know someone who can fabricate the parting strips, please let me know. 

 

Thank you for your help. 

 

 

[David J]

i'm sorry I can't help with the part, but if you need specific measurements, it may very similar to the pieces on my 1910 IHC J-30. Let me know if I can send pictures etc. (but not the part. sorry)