Bob Engle Posted March 10, 2017 Share Posted March 10, 2017 On my 60 Invicta, at the rear of the inner rocker panels there is a rubber flap that has a push fit tab at the top and fits flush with the rocker panel. It covers a rectangular hole that if flush with the bottom of rocker. I believe it's purpose is to allow any water that would get in the space between the inner and outer rocker panels to drain but would keep it closed to anything entering at the opening. The old original parts have a part # on them PN 4615573. I have searched for replacement parts for this application with no success. While searching on the net, I found a picture of 63 -64 Riviera parts that looked the same. A call to Cars Inc. confirmed the dimensions were the same. I got the replacements today and they are exact without the PN in the rubber. For anyone looking for this part from 1960 through 1964 would probably find this CArs Inc part # RP635 would fit. Bob Engle 2 Link to comment Share on other sites More sharing options...
Smartin Posted March 10, 2017 Share Posted March 10, 2017 Cool, thanks for the heads up. I have a feeling these are a pretty universal item. Link to comment Share on other sites More sharing options...
EmTee Posted March 11, 2017 Share Posted March 11, 2017 I'll have to go check, but I'm pretty sure I have seen those on my '64 GP. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now