Tie rod ends 1934 Dodge

[Ken_Lincoln]

G'day Guys ... I was asked tonight by an elderly club member if I knew of any tie rod ends from later vehicles compatible with 34 Dodge ...He had a list of John Deere part numbers that fit ... but can not find it  .. Dodge ones are near impossible to find here in Australia, and he has no internet access or internet banking to buy from the US.

I suggested I will try here, because if anyone knows it will be one of you guys

Thanks    Ken Lincoln

 

Edited May 20, 2016 by Ken_Lincoln (see edit history)

[Spinneyhill]

1959 DUFOR catalogue says the 1934 Dodge DR and DS take the TE2 left and right, Dodge part no's 951297 and 8, 3 RH and 2 LH.

 

TE2 fits the following (this will take a while...):

Dodge DU '35; D2, D3, D5, D8 '36-'38;

Dodge Truck UF10 '31-'32 after No. 8002596, F10 after no. 8101140, half ton, 4-6 cyl.

Dodge Truck '33-'39, HC, HCL, KC, KCL, LC, MC, MD15-16, MD20-21. RC. RD10-11. RD15-16, RD20-21, TC TD15, TD20-21, 1/2, 3/4, 1 ton 6 cyl.;

Chrysler '27-'29 50, 52; '29-'33 66, CJ, CM, CI, CO; CD, CP, CQ Imperial, CT Royal; '34-'35 CA, CB, C6, CZ, Airstream.

DeSoto '29-'32 K, CK, SA, SC, CF; '35 SF, Airstream.

Essex '27-'31 Super 6, Challenger 6, Mascot.

Fargo truck, '29-30 KC, QC, Packet, half ton, 4 cyl.; '38-'39 FG1, FH1, 3/4 Ton, FG2-20, FG2-36, FH2-20, FH2-33, 1Ton.

Graham '30 Special 6, 45 No's 735000-736000.

Hudson '30-'31 Great 8, Greater 8

International truck '28-'30 Special Delivery, 6-sp. special, '31-'34 A1 after no. 1119; A2 to No. 15337; B2 to No. 4141, 4 W.B., 3/4 to 1.5 ton.

Nash '29-'32 Light 6, std 6, Series 400, 420-428, 660, 960, Big 6, 1060, 970, Std 8, 1070.

Oldsmobile '31 F31

Plymouth '29-'32 Q, U, 30U, PA, PB; '33 PC, PD; '34 PG, PE, PF; '35 PJ; '36-'38 P1, P2, P3, P4, P5, P6; '37-'39 PT50, PT57, PT81, 1/2 ton commercial.

 

The relevant information is:

Female, 3/4x16 socket thread; 0.703 top taper, 0.609 bottom taper, 3/4" long; 1/2x20 ball bolt thread.

 

Good Luck!