1930 Chrysler 6 Cylinder - Sorry need pressure plate not clutch

I have a 1930 Chrysler 77 with a 6 cylinder Flat Top. I need a pressure plate and an exhaust manifold. Any ideas where to look. I removed the transmission today and discovered the broken pressure plate, clutch looks almost new.

Manifolds were a problem for the old Chryslers. You could have it welded at a good weld shop if your not going to do a show car. Jay Astheimer might be able to help with the clutch parts and other parts you might need astheime@ptd.net. I know where you can get an exact reproduction air cleaner that would be correct for the car. Send me an email and I might be able to save you some trouble on the manifold timandjuliawolfe1@roadrunner.com

Second time today I've seen someone looking for these same parts!

Talked to Roger James at D&D Classic Auto Restoration today and he told me he could have a pressure plate made! The same day I read about your needs-I was contacted by another person who needs the same part! Rogers phone number is 1-800-332-7742. They have our car right now finishing it up. You can look them up , they have a web site.

Hello

According Chrysler Master Parts List:

Clutch pressure plate Part-No. 77908

for J-72 after CP-504-C, R-75, CC-66, V-70 (1929-1931), W-77

Clutch disc assembly Part-No. 313411

for M-62, J-72, P-65, R-75, CC-66, V-70 (1929-1931), W-77

and PT-Fargo Clipper, K-1-Fargo Freighter

Found in a 1936 Chilton Interchangeable Parts Book the following pages. Hope it helps.

Felix Aschwanden

Thanks but that one won't work. I found a guy in Rochester NY, and he says he can make it work so I mailed him the old one and expect an answer any day now.

I believe I may have one. Call Mark 818-272-4275.