Rodjaxx Posted May 21, 2007 Share Posted May 21, 2007 My 90 has been sitting for 2 mounths and the battery went dead. Charged it up and was dead next day. Though it was time for a new one. When I hooked up new battery I could hear ABS motor running. This is with the key off. I only let it run for about 1 1/2 min., then unpluged power to it.I would guess it's the perssure switch, but don't want to just start replacing parts.All I can find in past posts is what to test when the pump shuts off early and nothing about continually running. Link to comment Share on other sites More sharing options...
Guest dpannell Posted May 21, 2007 Share Posted May 21, 2007 I could be on the wrong track but.....If it continues to run with the ignition shut off I would suspect a stuck relay first. Dave Link to comment Share on other sites More sharing options...
Rodjaxx Posted May 21, 2007 Author Share Posted May 21, 2007 Thanks, it was the relay. It had come out of it's brackey and fallen onto the ERG pipe and melted and shorted out Link to comment Share on other sites More sharing options...
Guest RED891 Posted May 22, 2007 Share Posted May 22, 2007 Any real good way to keep the relays from falling? Link to comment Share on other sites More sharing options...
Guest mongeonman Posted May 22, 2007 Share Posted May 22, 2007 Tie it to the bracket or to other wires with a ty-rap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now