RayS Posted January 15, 2007 Share Posted January 15, 2007 On my 90 conv the cruise control will not work. I checked the fuse found it OK. Checked all vacume lines I think Good. The cruise light will not come on any thoughts on what to do nextThanks <img src="http://forums.aaca.org/images/graemlins/crazy.gif" alt="" /> Link to comment Share on other sites More sharing options...
jonlabree Posted January 15, 2007 Share Posted January 15, 2007 The servo unit is bad or dirty. Link to comment Share on other sites More sharing options...
Guest F14CRAZY Posted January 16, 2007 Share Posted January 16, 2007 May want to remove the plastic cover from above the driver's footwell and find the brake switch (the one with the vacuum line). It may be in need of adjustment, sorry I can't remember how it works exactly at the moment Link to comment Share on other sites More sharing options...
RayS Posted January 16, 2007 Author Share Posted January 16, 2007 Thanks I will try the switch and servo, and let you know how things turn out Link to comment Share on other sites More sharing options...
Guest jcc3inc Posted January 16, 2007 Share Posted January 16, 2007 Sir,When I first drove my Reatta back from NC, after engaging, the cruise control would first drop speed, and then pickup speed to where it should have been after a slight pause. It turned out that the vacuum hose was leaking just at the bend where it enters the servo. Hard to see/get at. I put a ty-rap around the slightly oversize hose and it now works OK.Regards,Jack C. Link to comment Share on other sites More sharing options...
RayS Posted January 17, 2007 Author Share Posted January 17, 2007 cut the vac hose and put in a 90o elbo, checked the switch, found on problem.Wens I am going to replace the servo and see what comes of that, I will let you know it works outThanks Link to comment Share on other sites More sharing options...
jonlabree Posted January 17, 2007 Share Posted January 17, 2007 The servo can be cleaned. I went out and purchased a new one and put it in. Then I took the old one apart and cleaned it. It now works fine.Jon... <img src="http://forums.aaca.org/images/graemlins/grin.gif" alt="" /> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now