Guest imported_Speedster Posted January 27, 2006 Share Posted January 27, 2006 After receiving the '31 lug bolts , from Packin31, I discovered that there are differences between them and '29 lug bolts, and evidently the wheels are different also. The '29 bolts are about a 1/4" longer, in overall length. The head shoulder flange, on the '31 bolts, are thinner, But the biggest difference is that the '31 bolts have a rounded shoulder, where the head meets the shank, where the '29 bolts have a captured lock-washer. That should make the '31 bolts stronger but the '29 wheels are not countersunk for them. So to use these bolts, I think the best thing to do is get some 5/8" I.D. washers and counter sink them to fit the bolt heads. It's Always something! <img src="http://forums.aaca.org/images/graemlins/wink.gif" alt="" /> Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted January 28, 2006 Share Posted January 28, 2006 I found that 13/16" I.D. 1/8" thick Lock washers fill that space beteen the '31 bolt heads and the '29 wheels and from 10' away you can't tell the difference. So another problem solved. <img src="http://forums.aaca.org/images/graemlins/grin.gif" alt="" /> Link to comment Share on other sites More sharing options...
Tom M Posted January 28, 2006 Share Posted January 28, 2006 Hi Rick,I am glad to hear that you were able to find a solution to use the lugs. If not you could of sent them back to me and I would of refunded your money. Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted January 28, 2006 Share Posted January 28, 2006 Thanks, But 'If it don't Fit, I Make it Fit'. <img src="http://forums.aaca.org/images/graemlins/wink.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/grin.gif" alt="" /> Link to comment Share on other sites More sharing options...
K8096 Posted February 5, 2006 Share Posted February 5, 2006 Check out e bay # 4609475133 - Packard lug bolts. Don't know if these are the type you're looking for, but it doesn't hurt to look. Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted February 5, 2006 Share Posted February 5, 2006 No, The bolts for Wire wheels are Too short for Wood wheels. <img src="http://forums.aaca.org/images/graemlins/crazy.gif" alt="" /> Even I, Can't make those Fit. <img src="http://forums.aaca.org/images/graemlins/wink.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/grin.gif" alt="" /> Thanks anyway, tho. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now