pitt9107 Posted July 6, 2005 Share Posted July 6, 2005 I want to take the spokes out of the wheel and redo them. I took off the tire and then the brake hub, then I removed the nuts & bolts from the center of the hub and removed them. Now comes the ?. How do I seperate the brake hub from the outter hub, so that I can remove the spokes? I am working on a 29 DB standard 6, (thanks to this forum I now know what I have) Thanks Bob Link to comment Share on other sites More sharing options...
Donlock Posted July 6, 2005 Share Posted July 6, 2005 First number all spokes on the ends and donot sand round pin at top,orsides of taper at bottom or the part that fits around hub. If you do ,you will be shimming to take click out !!! If painted you have to bleach paint out tomake natural wood grain. Good Luck time and patience Link to comment Share on other sites More sharing options...
Bill Boudway Posted July 13, 2005 Share Posted July 13, 2005 Hi,You may need to use a hydraulic press to get the brake drum separated from the hub. It took 14 tons of pressure to do this on our Packard wheels.Good luck,Bill Boudway Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now