65_wcat Posted August 1, 2004 Share Posted August 1, 2004 I've got a very frustrating problem that I hope someone can help me with.I decided to replace the top cylinders on my '65 Wildcat. When putting up the top, the right side would come up pretty far and then the left side would pop up sharply. After tht point, the two sides would move in synch and top would come up normally. I didn't want to bend the top frame, so I decided to replace the cylinders.Now, after replacing the cylinders, it struggled to come up once. After that, the right side would lift up a little but the top wouldn't come up at all!!!. If I gently lifted the left side while my wife hit the switch, the top would eventually come up.I've replaced the pump, bled the system a few times (don't see any bubles in the lines, even oiled the hinges, but to no avail. The top does go down smoothly.Any ideas?????????? Thanks.GregBCA #38869 Link to comment Share on other sites More sharing options...
BigFella Posted August 1, 2004 Share Posted August 1, 2004 hey greg, you might want to move this into the "general" forum and out of the "buy sell" forum :-) Link to comment Share on other sites More sharing options...
65_wcat Posted August 1, 2004 Author Share Posted August 1, 2004 duh!!!!! I'm so used to checking out this forum that I automatically placed it here.Thanks for the head's up. I just moved it! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now