jumpseat Posted May 24, 2004 Share Posted May 24, 2004 Will a 1932 Packard Super 8 cyl. Head fit a 36 Super 8 that had an Aluminum head??> and will the distributer mount the same? Thanks:Jimwestart@earthlink.net Link to comment Share on other sites More sharing options...
John N. Packard Posted May 25, 2004 Share Posted May 25, 2004 Jim, My guess is yes. If you had a '37 Super 8 the answer would be no, because Packard upgraded the Eight motor to the Super 8 line in '37.jnp Link to comment Share on other sites More sharing options...
Guest Posted May 25, 2004 Share Posted May 25, 2004 I would also say it should fit since the 32 and 36 384.8 CID engine is the same engine. Link to comment Share on other sites More sharing options...
Dave Mitchell Posted May 26, 2004 Share Posted May 26, 2004 The 32 - 34 Super 8 head is different than the 35 - 36 Super 8 head - the first thing is that the 35 - 36 has a bolt on water inlet, and the 32 - 34 inlet is integral to the casting. There may be other differences also, although it might bolt on and run fine. The 32 did also use a different distributor, I am not sure if that would be a problem either. Good luck! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now