Guest Posted August 15, 2003 Share Posted August 15, 2003 I have a 65 cutlass f-85 with the 330 and i would like to know if there is a good rebuild kit for the 330 engine? plz help Link to comment Share on other sites More sharing options...
Sgt Art Posted August 15, 2003 Share Posted August 15, 2003 When you say rebuild kit, what parts are you wanting to replace? Obviously gaskets or a gasket kit would be necessary. Are you going to bore the cylinders? Then you need a set of piston's and rings. If you're doing the lower part of the engine, oil pump, rod and main bearings. If you're going to replace the cam and lifters, then you should be looking at replacing the cam bearings too. I think you should make a list of what parts you want. There are good parts vendors on the the internet, just run a search, but I prefer to deal with local vendors. It may cost a bit more, but I can still remember getting a set of 350 Chev rings for an old 283 I was building and then having to send them back to the mail order firm I bought them from. However, you may want to check some of the Hot Rod mags, a couple of big reasonable priced vendors advertise in them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now